patroni.ha module

class patroni.ha. Failsafe ( dcs : AbstractDCS ) View on GitHub

Bases: object

__init__ ( dcs : AbstractDCS ) → None View on GitHub

_reset_state ( ) → None View on GitHub

Is used to report in REST API whether the failsafe mode was activated.

On primary the self._last_update is set from the set_is_active() method and always returns the correct value.

On replicas the self._last_update is set at the moment when the primary performs POST /failsafe REST API calls. The side-effect - it is possible that replicas will show failsafe_is_active values different from the primary.

property leader : Leader | None View on GitHub

set_is_active ( value : float ) → None View on GitHub

update ( data : Dict [ str , Any ] ) → None View on GitHub

update_cluster ( cluster : Cluster ) → Cluster View on GitHub

class patroni.ha. Ha ( patroni : Patroni ) View on GitHub

Bases: object

__init__ ( patroni : Patroni ) View on GitHub

_delete_leader ( last_lsn : int | None = None ) → None View on GitHub

_do_reinitialize ( cluster : Cluster ) → bool | None View on GitHub

_failsafe_config ( ) → Dict [ str , str ] | None View on GitHub

_get_failover_action_name ( ) → str View on GitHub

Return the currently requested manual failover action name or the default failover .

Returns :: str representing the manually requested action ( manual failover if no leader is specified in the /failover in DCS, switchover otherwise) or failover if /failover is empty.

_get_node_to_follow ( cluster : Cluster ) → Leader | Member | None View on GitHub

Determine the node to follow.

Parameters :: cluster – the currently known cluster state from DCS.
Returns :: the node which we should be replicating from.

_handle_crash_recovery ( ) → str | None View on GitHub

_handle_dcs_error ( ) → str View on GitHub

_handle_rewind_or_reinitialize ( ) → str | None View on GitHub

_is_healthiest_node ( members : Collection [ Member ] , check_replication_lag : bool = True ) → bool View on GitHub: This method tries to determine whether I am healthy enough to became a new leader candidate or not.

_run_cycle ( ) → str View on GitHub

_sync_replication_slots ( dcs_failed : bool ) → List [ str ] View on GitHub

Handles replication slots.

Parameters :: dcs_failed – bool, indicates that communication with DCS failed (get_cluster() or update_leader())
Returns :: list[str], replication slots names that should be copied from the primary

acquire_lock ( ) → bool View on GitHub

bootstrap ( ) → str View on GitHub

bootstrap_standby_leader ( ) → bool | None View on GitHub: If we found ‘standby’ key in the configuration, we need to bootstrap not a real primary, but a ‘standby leader’, that will take base backup from a remote member and start follow it.

call_failsafe_member ( data : Dict [ str , Any ] , member : Member ) → bool View on GitHub

cancel_initialization ( ) → None View on GitHub

check_failsafe_topology ( ) → bool View on GitHub

Check whether we could continue to run as a primary by calling all members from the failsafe topology.

Note

If the /failsafe key contains invalid data or if the name of our node is missing in the /failsafe key, we immediately give up and return False .

We send the JSON document in the POST request with the following fields:

name - the name of our node;
conn_url - connection URL to the postgres, which is reachable from other nodes;
api_url - connection URL to Patroni REST API on this node reachable from other nodes;
slots - a dict with replication slots that exist on the leader node, including the primary itself with the last known LSN, because there could be a permanent physical slot on standby nodes.

Standby nodes are using information from the slots dict to advance position of permanent replication slots while DCS is not accessible in order to avoid indefinite growth of pg_wal .

Returns :: True if all members from the /failsafe topology agree that this node could continue to run as a primary , or False if some of standby nodes are not accessible or don’t agree.

check_timeline ( ) → bool View on GitHub

Returns :: True if should check whether the timeline is latest during the leader race.

clone ( clone_member : Leader | Member | None = None , msg : str = '(without leader)' ) → bool | None View on GitHub

delete_future_restart ( ) → bool View on GitHub

demote ( mode : str ) → bool | None View on GitHub

Demote PostgreSQL running as primary.

Parameters :: mode – One of offline, graceful, immediate or immediate-nolock. offline is used when connection to DCS is not available. graceful is used when failing over to another node due to user request. May only be called running async. immediate is used when we determine that we are not suitable for primary and want to failover quickly without regard for data durability. May only be called synchronously. immediate-nolock is used when find out that we have lost the lock to be primary. Need to bring down PostgreSQL as quickly as possible without regard for data durability. May only be called synchronously.

enforce_follow_remote_member ( message : str ) → str View on GitHub

enforce_primary_role ( message : str , promote_message : str ) → str View on GitHub: Ensure the node that has won the race for the leader key meets criteria for promoting its PG server to the ‘primary’ role.

evaluate_scheduled_restart ( ) → str | None View on GitHub

failsafe_is_active ( ) → bool View on GitHub

fetch_node_status ( member : Member ) → _MemberStatus View on GitHub: This function perform http get request on member.api_url and fetches its status :returns: _MemberStatus object

fetch_nodes_statuses ( members : List [ Member ] ) → List [ _MemberStatus ] View on GitHub

follow ( demote_reason : str , follow_reason : str , refresh : bool = True ) → str View on GitHub

future_restart_scheduled ( ) → Dict [ str , Any ] View on GitHub

get_effective_tags ( ) → Dict [ str , Any ] View on GitHub: Return configuration tags merged with dynamically applied tags.

get_failover_candidates ( exclude_failover_candidate : bool ) → List [ Member ] View on GitHub

Return a list of candidates for either manual or automatic failover.

Exclude non-sync members when in synchronous mode, the current node (its checks are always performed earlier) and the candidate if required. If failover candidate exclusion is not requested and a candidate is specified in the /failover key, return the candidate only. The result is further evaluated in the caller Ha.is_failover_possible() to check if any member is actually healthy enough and is allowed to poromote.

Parameters :: exclude_failover_candidate – if True , exclude failover.candidate from the candidates.
Returns :: a list of Member ojects or an empty list if there is no candidate available.

get_remote_member ( member : Leader | Member | None = None ) → RemoteMember View on GitHub

Get remote member node to stream from.

In case of standby cluster this will tell us from which remote member to stream. Config can be both patroni config or cluster.config.data.

handle_long_action_in_progress ( ) → str View on GitHub: Figure out what to do with the task AsyncExecutor is performing.

handle_starting_instance ( ) → str | None View on GitHub: Starting up PostgreSQL may take a long time. In case we are the leader we may want to fail over to.

has_lock ( info : bool = True ) → bool View on GitHub

is_failover_possible ( * , cluster_lsn : int = 0 , exclude_failover_candidate : bool = False ) → bool View on GitHub

Checks whether any of the cluster members is allowed to promote and is healthy enough for that.

Parameters :

cluster_lsn – to calculate replication lag and exclude member if it is lagging.
exclude_failover_candidate – if True , exclude failover.candidate from the members list against which the failover possibility checks are run.

Returns :

True if there are members eligible to become the new leader.

is_failsafe_mode ( ) → bool View on GitHub

Returns :: True if failsafe_mode is enabled in global configuration.

is_healthiest_node ( ) → bool View on GitHub

Performs a series of checks to determine that the current node is the best candidate.

In case if manual failover/switchover is requested it calls manual_failover_process_no_leader() method.

Returns :: True if the current node is among the best candidates to become the new leader.

is_lagging ( wal_position : int ) → bool View on GitHub

Returns if instance with an wal should consider itself unhealthy to be promoted due to replication lag.

Parameters :: wal_position – Current wal position.

:returns True when node is lagging

is_leader ( ) → bool View on GitHub

Returns :: True if the current node is the leader, based on expiration set when it last held the key.

is_paused ( ) → bool View on GitHub

Returns :: True if in maintenance mode.

is_standby_cluster ( ) → bool View on GitHub

Returns :: True if global configuration has a valid "standby_cluster" section.

is_sync_standby ( cluster : Cluster ) → bool View on GitHub

Returns :: True if the current node is a synchronous standby.

is_synchronous_mode ( ) → bool View on GitHub

Returns :: True if synchronous replication is requested.

load_cluster_from_dcs ( ) → None View on GitHub

manual_failover_process_no_leader ( ) → bool | None View on GitHub

Handles manual failover/switchover when the old leader already stepped down.

Returns :

True if the current node is the best candidate to become the new leader
None if the current node is running as a primary and requested candidate doesn’t exist

notify_citus_coordinator ( event : str ) → None View on GitHub

post_bootstrap ( ) → str View on GitHub

post_recover ( ) → str | None View on GitHub

primary_stop_timeout ( ) → int | None View on GitHub

Returns :: "primary_stop_timeout" from the global configuration or None when not in synchronous mode.

process_healthy_cluster ( ) → str View on GitHub

process_manual_failover_from_leader ( ) → str | None View on GitHub

Checks if manual failover is requested and takes action if appropriate.

Cleans up failover key if failover conditions are not matched.

Returns :: action message if demote was initiated, None if no action was taken

process_sync_replication ( ) → None View on GitHub

Process synchronous standby beahvior.

Synchronous standbys are registered in two places postgresql.conf and DCS. The order of updating them must be right. The invariant that should be kept is that if a node is primary and sync_standby is set in DCS, then that node must have synchronous_standby set to that value. Or more simple, first set in postgresql.conf and then in DCS. When removing, first remove in DCS, then in postgresql.conf. This is so we only consider promoting standbys that were guaranteed to be replicating synchronously.

process_unhealthy_cluster ( ) → str View on GitHub: Cluster has no leader key

recover ( ) → str View on GitHub

Handle the case when postgres isn’t running.

Depending on the state of Patroni, DCS cluster view, and pg_controldata the following could happen:

if primary_start_timeout is 0 and this node owns the leader lock, the lock will be voluntarily released if there are healthy replicas to take it over.

if postgres was running as a primary and this node owns the leader lock, postgres is started as primary.

crash recover in a single-user mode is executed in the following cases:

postgres was running as primary wasn’t shut down cleanly and there is no leader in DCS

postgres was running as replica wasn’t shut down in recovery (cleanly) and we need to run pg_rewind to join back to the cluster.

pg_rewind is executed if it is necessary, or optinally, the data directory could

be removed if it is allowed by configuration.

after crash recovery and/or pg_rewind are executed, postgres is started in recovery.

Returns :: action message, describing what was performed.

reinitialize ( force : bool = False ) → str | None View on GitHub

release_leader_key_voluntarily ( last_lsn : int | None = None ) → None View on GitHub

restart ( restart_data : Dict [ str , Any ] , run_async : bool = False ) → Tuple [ bool , str ] View on GitHub: conditional and unconditional restart

restart_matches ( role : str | None , postgres_version : str | None , pending_restart : bool ) → bool View on GitHub

restart_scheduled ( ) → bool View on GitHub

run_cycle ( ) → str View on GitHub

schedule_future_restart ( restart_data : Dict [ str , Any ] ) → bool View on GitHub

set_is_leader ( value : bool ) → None View on GitHub

Update the current node’s view of it’s own leadership status.

Will update the expiry timestamp to match the dcs ttl if setting leadership to true, otherwise will set the expiry to the past to immediately invalidate.

Parameters :: value – is the current node the leader.

set_start_timeout ( value : int | None ) → None View on GitHub

Sets timeout for starting as primary before eligible for failover.

Must be called when async_executor is busy or in the main thread.

should_run_scheduled_action ( action_name : str , scheduled_at : datetime | None , cleanup_fn : Callable [ [ ... ] , Any ] ) → bool View on GitHub

shutdown ( ) → None View on GitHub

sync_mode_is_active ( ) → bool View on GitHub

Check whether synchronous replication is requested and already active.

Returns :: True if the primary already put its name into the /sync in DCS.

static sysid_valid ( sysid : str | None ) → bool View on GitHub

touch_member ( ) → bool View on GitHub

update_cluster_history ( ) → None View on GitHub

update_failsafe ( data : Dict [ str , Any ] ) → str | None View on GitHub

update_lock ( update_status : bool = False ) → bool View on GitHub

Update the leader lock in DCS.

Note

After successful update of the leader key the AbstractDCS.update_leader() method could also optionally update the /status and /failsafe keys.

The /status key contains the last known LSN on the leader node and the last known state of permanent replication slots including permanent physical replication slot for the leader.

Last, but not least, this method calls a Watchdog.keepalive() method after the leader key was successfully updated.

Parameters :: update_status – True if we also need to update the /status key in DCS, otherwise False .
Returns :: True if the leader key was successfully updated and we can continue to run postgres as a primary or as a standby_leader , otherwise False .

wakeup ( ) → None View on GitHub

Trigger the next run of HA loop if there is no "active" leader watch request in progress.

This usually happens on the leader or if the node is running async action

watch ( timeout : float ) → bool View on GitHub

while_not_sync_standby ( func : Callable [ [ ... ] , Any ] ) → Any View on GitHub

Runs specified action while trying to make sure that the node is not assigned synchronous standby status.

Tags us as not allowed to be a sync standby as we are going to go away, if we currently are wait for leader to notice and pick an alternative one or if the leader changes or goes away we are also free.

If the connection to DCS fails we run the action anyway, as this is only a hint.

There is a small race window where this function runs between a primary picking us the sync standby and publishing it to the DCS. As the window is rather tiny consequences are holding up commits for one cycle period we don’t worry about it here.

class patroni.ha. _MemberStatus ( member : Member , reachable : bool , in_recovery : bool | None , wal_position : int , data : Dict [ str , Any ] ) View on GitHub

Bases: Tags , _MemberStatus

Node status distilled from API response.

Consists of the following fields:

Variables :

member – Member object of the node.
reachable – False if the node is not reachable or is not responding with correct JSON.
in_recovery – False if the node is running as a primary ( if pg_is_in_recovery() == true ).
wal_position – maximum value of replayed_location or received_location from JSON.
data – the whole JSON response for future usage.

_abc_impl = <_abc._abc_data object>

failover_limitation ( ) → str | None View on GitHub: Returns reason why this node can’t promote or None if everything is ok.

classmethod from_api_response ( member : Member , json : Dict [ str , Any ] ) → _MemberStatus View on GitHub

Parameters :

member – dcs.Member object
json – RestApiHandler.get_postgresql_status() result

Returns :

_MemberStatus object

property tags : Dict [ str , Any ] View on GitHub: Dictionary with values of different tags (i.e. nofailover).

property timeline : int View on GitHub: Timeline value from JSON.

classmethod unknown ( member : Member ) → _MemberStatus View on GitHub: Create a new class instance with empty or null values.

property watchdog_failed : bool View on GitHub: Indicates that watchdog is required by configuration but not available or failed.