Navigation :

initdb

initdb
Prev Up PostgreSQL Server Applications Home Next

initdb

initdb - create a new PostgreSQL database cluster

Synopsis

initdb [ option ...] [ --pgdata | -D ] directory

Description

initdb creates a new PostgreSQL database cluster. A database cluster is a collection of databases that are managed by a single server instance.

Creating a database cluster consists of creating the directories in which the database data will live, generating the shared catalog tables (tables that belong to the whole cluster rather than to any particular database), and creating the template1 and postgres databases. When you later create a new database, everything in the template1 database is copied. (Therefore, anything installed in template1 is automatically copied into each database created later.) The postgres database is a default database meant for use by users, utilities and third party applications.

Although initdb will attempt to create the specified data directory, it might not have permission if the parent directory of the desired data directory is root-owned. To initialize in such a setup, create an empty data directory as root, then use chown to assign ownership of that directory to the database user account, then su to become the database user to run initdb .

initdb must be run as the user that will own the server process, because the server needs to have access to the files and directories that initdb creates. Since the server cannot be run as root, you must not run initdb as root either. (It will in fact refuse to do so.)

For security reasons the new cluster created by initdb will only be accessible by the cluster owner by default. The --allow-group-access option allows any user in the same group as the cluster owner to read files in the cluster. This is useful for performing backups as a non-privileged user.

initdb initializes the database cluster's default locale and character set encoding. The character set encoding, collation order ( LC_COLLATE ) and character set classes ( LC_CTYPE , e.g., upper, lower, digit) can be set separately for a database when it is created. initdb determines those settings for the template1 database, which will serve as the default for all other databases.

To alter the default collation order or character set classes, use the --lc-collate and --lc-ctype options. Collation orders other than C or POSIX also have a performance penalty. For these reasons it is important to choose the right locale when running initdb .

The remaining locale categories can be changed later when the server is started. You can also use --locale to set the default for all locale categories, including collation order and character set classes. All server locale values ( lc_* ) can be displayed via SHOW ALL . More details can be found in Section 24.1 .

To alter the default encoding, use the --encoding . More details can be found in Section 24.3 .

Options

-A authmethod
--auth= authmethod

This option specifies the default authentication method for local users used in pg_hba.conf ( host and local lines). initdb will prepopulate pg_hba.conf entries using the specified authentication method for non-replication as well as replication connections.

Do not use trust unless you trust all local users on your system. trust is the default for ease of installation.

--auth-host= authmethod

This option specifies the authentication method for local users via TCP/IP connections used in pg_hba.conf ( host lines).

--auth-local= authmethod

This option specifies the authentication method for local users via Unix-domain socket connections used in pg_hba.conf ( local lines).

-D directory
--pgdata= directory

This option specifies the directory where the database cluster should be stored. This is the only information required by initdb , but you can avoid writing it by setting the PGDATA environment variable, which can be convenient since the database server ( postgres ) can find the database directory later by the same variable.

-E encoding
--encoding= encoding

Selects the encoding of the template database. This will also be the default encoding of any database you create later, unless you override it there. The default is derived from the locale, or SQL_ASCII if that does not work. The character sets supported by the PostgreSQL server are described in Section 24.3.1 .

-g
--allow-group-access

Allows users in the same group as the cluster owner to read all cluster files created by initdb . This option is ignored on Windows as it does not support POSIX -style group permissions.

-k
--data-checksums

Use checksums on data pages to help detect corruption by the I/O system that would otherwise be silent. Enabling checksums may incur a noticeable performance penalty. If set, checksums are calculated for all objects, in all databases. All checksum failures will be reported in the pg_stat_database view. See Section 30.2 for details.

--locale= locale

Sets the default locale for the database cluster. If this option is not specified, the locale is inherited from the environment that initdb runs in. Locale support is described in Section 24.1 .

--lc-collate= locale
--lc-ctype= locale
--lc-messages= locale
--lc-monetary= locale
--lc-numeric= locale
--lc-time= locale

Like --locale , but only sets the locale in the specified category.

--no-locale

Equivalent to --locale=C .

-N
--no-sync

By default, initdb will wait for all files to be written safely to disk. This option causes initdb to return without waiting, which is faster, but means that a subsequent operating system crash can leave the data directory corrupt. Generally, this option is useful for testing, but should not be used when creating a production installation.

--no-instructions

By default, initdb will write instructions for how to start the cluster at the end of its output. This option causes those instructions to be left out. This is primarily intended for use by tools that wrap initdb in platform specific behavior, where those instructions are likely to be incorrect.

--pwfile= filename

Makes initdb read the database superuser's password from a file. The first line of the file is taken as the password.

-S
--sync-only

Safely write all database files to disk and exit. This does not perform any of the normal initdb operations.

-T config
--text-search-config= config

Sets the default text search configuration. See default_text_search_config for further information.

-U username
--username= username

Selects the user name of the database superuser. This defaults to the name of the effective user running initdb . It is really not important what the superuser's name is, but one might choose to keep the customary name postgres , even if the operating system user's name is different.

-W
--pwprompt

Makes initdb prompt for a password to give the database superuser. If you don't plan on using password authentication, this is not important. Otherwise you won't be able to use password authentication until you have a password set up.

-X directory
--waldir= directory

This option specifies the directory where the write-ahead log should be stored.

--wal-segsize= size

Set the WAL segment size , in megabytes. This is the size of each individual file in the WAL log. The default size is 16 megabytes. The value must be a power of 2 between 1 and 1024 (megabytes). This option can only be set during initialization, and cannot be changed later.

It may be useful to adjust this size to control the granularity of WAL log shipping or archiving. Also, in databases with a high volume of WAL, the sheer number of WAL files per directory can become a performance and management problem. Increasing the WAL file size will reduce the number of WAL files.

Other, less commonly used, options are also available:

-d
--debug

Print debugging output from the bootstrap backend and a few other messages of lesser interest for the general public. The bootstrap backend is the program initdb uses to create the catalog tables. This option generates a tremendous amount of extremely boring output.

--discard-caches

Run the bootstrap backend with the debug_discard_caches=1 option. This takes a very long time and is only of use for deep debugging.

-L directory

Specifies where initdb should find its input files to initialize the database cluster. This is normally not necessary. You will be told if you need to specify their location explicitly.

-n
--no-clean

By default, when initdb determines that an error prevented it from completely creating the database cluster, it removes any files it might have created before discovering that it cannot finish the job. This option inhibits tidying-up and is thus useful for debugging.

Other options:

-V
--version

Print the initdb version and exit.

-?
--help

Show help about initdb command line arguments, and exit.

Environment

PGDATA

Specifies the directory where the database cluster is to be stored; can be overridden using the -D option.

PG_COLOR

Specifies whether to use color in diagnostic messages. Possible values are always , auto and never .

TZ

Specifies the default time zone of the created database cluster. The value should be a full time zone name (see Section 8.5.3 ).

This utility, like most other PostgreSQL utilities, also uses the environment variables supported by libpq (see Section 34.15 ).

Notes

initdb can also be invoked via pg_ctl initdb .

Prev Up Next
PostgreSQL Server Applications Home pg_archivecleanup