Index Access Method Functions
PostgreSQL 9.6.9 Documentation | |||
---|---|---|---|
Prev | Up | Chapter 59. Index Access Method Interface Definition | Next |
The index construction and maintenance functions that an index access method must provide in IndexAmRoutine are:
IndexBuildResult * ambuild (Relation heapRelation, Relation indexRelation, IndexInfo *indexInfo);
Build a new index. The index relation has been physically created,
but is empty. It must be filled in with whatever fixed data the
access method requires, plus entries for all tuples already existing
in the table. Ordinarily the
ambuild
function will call
IndexBuildHeapScan()
to scan the table for existing tuples
and compute the keys that need to be inserted into the index.
The function must return a palloc'd struct containing statistics about
the new index.
void ambuildempty (Relation indexRelation);
Build an empty index, and write it to the initialization fork ( INIT_FORKNUM ) of the given relation. This method is called only for unlogged indexes; the empty index written to the initialization fork will be copied over the main relation fork on each server restart.
bool aminsert (Relation indexRelation, Datum *values, bool *isnull, ItemPointer heap_tid, Relation heapRelation, IndexUniqueCheck checkUnique);
Insert a new tuple into an existing index. The values and isnull arrays give the key values to be indexed, and heap_tid is the TID to be indexed. If the access method supports unique indexes (its amcanunique flag is true) then checkUnique indicates the type of uniqueness check to perform. This varies depending on whether the unique constraint is deferrable; see Section 59.5 for details. Normally the access method only needs the heapRelation parameter when performing uniqueness checking (since then it will have to look into the heap to verify tuple liveness).
The function's Boolean result value is significant only when checkUnique is UNIQUE_CHECK_PARTIAL . In this case a TRUE result means the new entry is known unique, whereas FALSE means it might be non-unique (and a deferred uniqueness check must be scheduled). For other cases a constant FALSE result is recommended.
Some indexes might not index all tuples. If the tuple is not to be
indexed,
aminsert
should just return without doing anything.
IndexBulkDeleteResult * ambulkdelete (IndexVacuumInfo *info, IndexBulkDeleteResult *stats, IndexBulkDeleteCallback callback, void *callback_state);
Delete tuple(s) from the index. This is a
"bulk delete"
operation
that is intended to be implemented by scanning the whole index and checking
each entry to see if it should be deleted.
The passed-in
callback
function must be called, in the style
callback(
TID
, callback_state) returns bool
,
to determine whether any particular index entry, as identified by its
referenced TID, is to be deleted. Must return either NULL or a palloc'd
struct containing statistics about the effects of the deletion operation.
It is OK to return NULL if no information needs to be passed on to
amvacuumcleanup
.
Because of limited
maintenance_work_mem
,
ambulkdelete
might need to be called more than once when many
tuples are to be deleted. The
stats
argument is the result
of the previous call for this index (it is NULL for the first call within a
VACUUM
operation). This allows the AM to accumulate statistics
across the whole operation. Typically,
ambulkdelete
will
modify and return the same struct if the passed
stats
is not
null.
IndexBulkDeleteResult * amvacuumcleanup (IndexVacuumInfo *info, IndexBulkDeleteResult *stats);
Clean up after a
VACUUM
operation (zero or more
ambulkdelete
calls). This does not have to do anything
beyond returning index statistics, but it might perform bulk cleanup
such as reclaiming empty index pages.
stats
is whatever the
last
ambulkdelete
call returned, or NULL if
ambulkdelete
was not called because no tuples needed to be
deleted. If the result is not NULL it must be a palloc'd struct.
The statistics it contains will be used to update
pg_class
,
and will be reported by
VACUUM
if
VERBOSE
is given.
It is OK to return NULL if the index was not changed at all during the
VACUUM
operation, but otherwise correct stats should
be returned.
As of
PostgreSQL
8.4,
amvacuumcleanup
will also be called at completion of an
ANALYZE
operation. In this case
stats
is always
NULL and any return value will be ignored. This case can be distinguished
by checking
info->analyze_only
. It is recommended
that the access method do nothing except post-insert cleanup in such a
call, and that only in an autovacuum worker process.
bool amcanreturn (Relation indexRelation, int attno);
Check whether the index can support index-only scans on the given column, by returning the indexed column values for an index entry in the form of an IndexTuple . The attribute number is 1-based, i.e. the first column's attno is 1. Returns TRUE if supported, else FALSE. If the access method does not support index-only scans at all, the amcanreturn field in its IndexAmRoutine struct can be set to NULL.
void amcostestimate (PlannerInfo *root, IndexPath *path, double loop_count, Cost *indexStartupCost, Cost *indexTotalCost, Selectivity *indexSelectivity, double *indexCorrelation);
Estimate the costs of an index scan. This function is described fully in Section 59.6 , below.
bytea * amoptions (ArrayType *reloptions, bool validate);
Parse and validate the reloptions array for an index. This is called only when a non-null reloptions array exists for the index. reloptions is a text array containing entries of the form name = value . The function should construct a bytea value, which will be copied into the rd_options field of the index's relcache entry. The data contents of the bytea value are open for the access method to define; most of the standard access methods use struct StdRdOptions . When validate is true, the function should report a suitable error message if any of the options are unrecognized or have invalid values; when validate is false, invalid entries should be silently ignored. ( validate is false when loading options already stored in pg_catalog ; an invalid entry could only be found if the access method has changed its rules for options, and in that case ignoring obsolete entries is appropriate.) It is OK to return NULL if default behavior is wanted.
bool amproperty (Oid index_oid, int attno, IndexAMProperty prop, const char *propname, bool *res, bool *isnull);
The
amproperty
method allows index access methods to override
the default behavior of
pg_index_column_has_property
and related functions.
If the access method does not have any special behavior for index property
inquiries, the
amproperty
field in
its
IndexAmRoutine
struct can be set to NULL.
Otherwise, the
amproperty
method will be called with
index_oid
and
attno
both zero for
pg_indexam_has_property
calls,
or with
index_oid
valid and
attno
zero for
pg_index_has_property
calls,
or with
index_oid
valid and
attno
greater than
zero for
pg_index_column_has_property
calls.
prop
is an enum value identifying the property being tested,
while
propname
is the original property name string.
If the core code does not recognize the property name
then
prop
is
AMPROP_UNKNOWN
.
Access methods can define custom property names by
checking
propname
for a match (use
pg_strcasecmp
to match, for consistency with the core code); for names known to the core
code, it's better to inspect
prop
.
If the
amproperty
method returns
true
then
it has determined the property test result: it must set
*res
to the boolean value to return, or set
*isnull
to
true
to return a NULL. (Both of the referenced variables
are initialized to
false
before the call.)
If the
amproperty
method returns
false
then
the core code will proceed with its normal logic for determining the
property test result.
Access methods that support ordering operators should implement AMPROP_DISTANCE_ORDERABLE property testing, as the core code does not know how to do that and will return NULL. It may also be advantageous to implement AMPROP_RETURNABLE testing, if that can be done more cheaply than by opening the index and calling amcanreturn , which is the core code's default behavior. The default behavior should be satisfactory for all other standard properties.
bool amvalidate (Oid opclassoid);
Validate the catalog entries for the specified operator class, so far as
the access method can reasonably do that. For example, this might include
testing that all required support functions are provided.
The
amvalidate
function must return false if the opclass is
invalid. Problems should be reported with
ereport
messages.
The purpose of an index, of course, is to support scans for tuples matching an indexable WHERE condition, often called a qualifier or scan key . The semantics of index scanning are described more fully in Section 59.3 , below. An index access method can support "plain" index scans, "bitmap" index scans, or both. The scan-related functions that an index access method must or may provide are:
IndexScanDesc ambeginscan (Relation indexRelation, int nkeys, int norderbys);
Prepare for an index scan. The
nkeys
and
norderbys
parameters indicate the number of quals and ordering operators that will be
used in the scan; these may be useful for space allocation purposes.
Note that the actual values of the scan keys aren't provided yet.
The result must be a palloc'd struct.
For implementation reasons the index access method
must
create this struct by calling
RelationGetIndexScan()
. In most cases
ambeginscan
does little beyond making that call and perhaps
acquiring locks;
the interesting parts of index-scan startup are in
amrescan
.
void amrescan (IndexScanDesc scan, ScanKey keys, int nkeys, ScanKey orderbys, int norderbys);
Start or restart an index scan, possibly with new scan keys. (To restart
using previously-passed keys, NULL is passed for
keys
and/or
orderbys
.) Note that it is not allowed for
the number of keys or order-by operators to be larger than
what was passed to
ambeginscan
. In practice the restart
feature is used when a new outer tuple is selected by a nested-loop join
and so a new key comparison value is needed, but the scan key structure
remains the same.
boolean amgettuple (IndexScanDesc scan, ScanDirection direction);
Fetch the next tuple in the given scan, moving in the given
direction (forward or backward in the index). Returns TRUE if a tuple was
obtained, FALSE if no matching tuples remain. In the TRUE case the tuple
TID is stored into the
scan
structure. Note that
"success"
means only that the index contains an entry that matches
the scan keys, not that the tuple necessarily still exists in the heap or
will pass the caller's snapshot test. On success,
amgettuple
must also set
scan->xs_recheck
to TRUE or FALSE.
FALSE means it is certain that the index entry matches the scan keys.
TRUE means this is not certain, and the conditions represented by the
scan keys must be rechecked against the heap tuple after fetching it.
This provision supports
"lossy"
index operators.
Note that rechecking will extend only to the scan conditions; a partial
index predicate (if any) is never rechecked by
amgettuple
callers.
If the index supports
index-only
scans
(i.e.,
amcanreturn
returns TRUE for it),
then on success the AM must also check
scan->xs_want_itup
, and if that is true it must return
the original indexed data for the index entry, in the form of an
IndexTuple
pointer stored at
scan->xs_itup
,
with tuple descriptor
scan->xs_itupdesc
.
(Management of the data referenced by the pointer is the access method's
responsibility. The data must remain good at least until the next
amgettuple
,
amrescan
, or
amendscan
call for the scan.)
The
amgettuple
function need only be provided if the access
method supports
"plain"
index scans. If it doesn't, the
amgettuple
field in its
IndexAmRoutine
struct must be set to NULL.
int64 amgetbitmap (IndexScanDesc scan, TIDBitmap *tbm);
Fetch all tuples in the given scan and add them to the caller-supplied
TIDBitmap
(that is, OR the set of tuple IDs into whatever set is already
in the bitmap). The number of tuples fetched is returned (this might be
just an approximate count, for instance some AMs do not detect duplicates).
While inserting tuple IDs into the bitmap,
amgetbitmap
can
indicate that rechecking of the scan conditions is required for specific
tuple IDs. This is analogous to the
xs_recheck
output parameter
of
amgettuple
. Note: in the current implementation, support
for this feature is conflated with support for lossy storage of the bitmap
itself, and therefore callers recheck both the scan conditions and the
partial index predicate (if any) for recheckable tuples. That might not
always be true, however.
amgetbitmap
and
amgettuple
cannot be used in the same index scan; there
are other restrictions too when using
amgetbitmap
, as explained
in
Section 59.3
.
The
amgetbitmap
function need only be provided if the access
method supports
"bitmap"
index scans. If it doesn't, the
amgetbitmap
field in its
IndexAmRoutine
struct must be set to NULL.
void amendscan (IndexScanDesc scan);
End a scan and release resources. The scan struct itself should not be freed, but any locks or pins taken internally by the access method must be released.
void ammarkpos (IndexScanDesc scan);
Mark current scan position. The access method need only support one remembered scan position per scan.
The
ammarkpos
function need only be provided if the access
method supports ordered scans. If it doesn't,
the
ammarkpos
field in its
IndexAmRoutine
struct may be set to NULL.
void amrestrpos (IndexScanDesc scan);
Restore the scan to the most recently marked position.
The
amrestrpos
function need only be provided if the access
method supports ordered scans. If it doesn't,
the
amrestrpos
field in its
IndexAmRoutine
struct may be set to NULL.