16.7. Platform-specific Notes
This section documents additional platform-specific issues regarding the installation and setup of PostgreSQL. Be sure to read the installation instructions, and in particular Section 16.2 as well. Also, check Chapter 33 regarding the interpretation of regression test results.
Platforms that are not covered here have no known platform-specific installation issues.
PostgreSQL works on AIX, but getting it installed properly can be
challenging. AIX versions from 4.3.3 to 6.1 are considered supported.
You can use GCC or the native IBM compiler
general, using recent versions of AIX and PostgreSQL helps. Check
the build farm for up to date information about which versions of
AIX are known to work.
The minimum recommended fix levels for supported AIX versions are:
- AIX 4.3.3
Maintenance Level 11 + post ML11 bundle
- AIX 5.1
Maintenance Level 9 + post ML9 bundle
- AIX 5.2
Technology Level 10 Service Pack 3
- AIX 5.3
Technology Level 7
- AIX 6.1
To check your current fix level, use
in AIX 4.3.3 to AIX 5.2 ML 7, or
in later versions.
Use the following
flags in addition
to your own if you have installed Readline or libz in
22.214.171.124. GCC Issues
On AIX 5.3, there have been some problems getting PostgreSQL to compile and run using GCC.
You will want to use a version of GCC subsequent to 3.3.2, particularly if you use a prepackaged version. We had good success with 4.0.1. Problems with earlier versions seem to have more to do with the way IBM packaged GCC than with actual issues with GCC, so that if you compile GCC yourself, you might well have success with an earlier version of GCC.
126.96.36.199. Unix-Domain Sockets Broken
AIX 5.3 has a problem
is not defined to
be large enough. In version 5.3, IBM increased the size of
, the address structure for
Unix-domain sockets, but did not correspondingly increase the
. The result of
this is that attempts to use Unix-domain sockets with PostgreSQL
lead to libpq overflowing the data structure. TCP/IP connections
work OK, but not Unix-domain sockets, which prevents the
regression tests from working.
The problem was reported to IBM, and is recorded as bug report
PMR29657. If you upgrade to maintenance level 5300-03 or later,
that will include this fix. A quick workaround
is to alter
to 1025 in
. In either case,
recompile PostgreSQL once you have the corrected header file.
188.8.131.52. Internet Address Issues
PostgreSQL relies on the system's
to parse IP addresses in
, etc. Older versions of AIX have assorted
bugs in this function. If you have problems related to these settings,
updating to the appropriate AIX fix level shown above
should take care of it.
One user reports:
When implementing PostgreSQL version 8.1 on AIX 5.3, we periodically ran into problems where the statistics collector would " mysteriously " not come up successfully. This appears to be the result of unexpected behavior in the IPv6 implementation. It looks like PostgreSQL and IPv6 do not play very well together on AIX 5.3.
Any of the following actions " fix " the problem.
Delete the IPv6 address for localhost:
(as root) # ifconfig lo0 inet6 ::1/0 delete
Remove IPv6 from net services. The file
/etc/netsvc.confon AIX is roughly equivalent to
/etc/nsswitch.confon Solaris/Linux. The default, on AIX, is thus:
Replace this with:
to deactivate searching for IPv6 addresses.
This is really a workaround for problems relating to immaturity of IPv6 support, which improved visibly during the course of AIX 5.3 releases. It has worked with AIX version 5.3, but does not represent an elegant solution to the problem. It has been reported that this workaround is not only unnecessary, but causes problems on AIX 6.1, where IPv6 support has become more mature.
184.108.40.206. Memory Management
AIX can be somewhat peculiar with regards to the way it does memory management. You can have a server with many multiples of gigabytes of RAM free, but still get out of memory or address space errors when running applications. One example is loading of extensions failing with unusual errors. For example, running as the owner of the PostgreSQL installation:
=# CREATE EXTENSION plperl; ERROR: could not load library "/opt/dbs/pgsql/lib/plperl.so": A memory address is not in the address space for the process.
Running as a non-owner in the group possessing the PostgreSQL installation:
=# CREATE EXTENSION plperl; ERROR: could not load library "/opt/dbs/pgsql/lib/plperl.so": Bad address
Another example is out of memory errors in the PostgreSQL server logs, with every memory allocation near or greater than 256 MB failing.
The overall cause of all these problems is the default bittedness and memory model used by the server process. By default, all binaries built on AIX are 32-bit. This does not depend upon hardware type or kernel in use. These 32-bit processes are limited to 4 GB of memory laid out in 256 MB segments using one of a few models. The default allows for less than 256 MB in the heap as it shares a single segment with the stack.
In the case of the
check your umask and the permissions of the binaries in your
PostgreSQL installation. The binaries involved in that example
were 32-bit and installed as mode 750 instead of 755. Due to the
permissions being set in this fashion, only the owner or a member
of the possessing group can load the library. Since it isn't
world-readable, the loader places the object into the process'
heap instead of the shared library segments where it would
otherwise be placed.
The " ideal " solution for this is to use a 64-bit build of PostgreSQL, but that is not always practical, because systems with 32-bit processors can build, but not run, 64-bit binaries.
If a 32-bit binary is desired, set
where 1 <= n <= 8, before starting the PostgreSQL server,
and try different values and
settings to find a configuration that works satisfactorily. This
tells AIX that you want the
server to have
bytes set aside for the
heap, allocated in 256 MB segments. When you find a workable
can be used to modify the binaries so
that they default to using the desired heap size. PostgreSQL can
also be rebuilt, passing
to achieve the same effect.
For a 64-bit build, set
to 64 and
. (Options for
might differ.) If you omit the export of
, your build may fail with linker errors. When
is set, it tells AIX's build utilities
type of objects to default to handling.
By default, overcommit of paging space can happen. While we have not seen this occur, AIX will kill processes when it runs out of memory and the overcommit is accessed. The closest to this that we have seen is fork failing because the system decided that there was not enough memory for another process. Like many other parts of AIX, the paging space allocation method and out-of-memory kill is configurable on a system- or process-wide basis if this becomes a problem.
PostgreSQL can be built using Cygwin, a Linux-like environment for Windows, but that method is inferior to the native Windows build (see Chapter 17 ) and running a server under Cygwin is no longer recommended.
When building from source, proceed according to the normal
installation procedure (i.e.,
; etc.), noting the following-Cygwin specific
Set your path to use the Cygwin bin directory before the Windows utilities. This will help prevent problems with compilation.
addusercommand is not supported; use the appropriate user management application on Windows NT, 2000, or XP. Otherwise, skip this step.
sucommand is not supported; use ssh to simulate su on Windows NT, 2000, or XP. Otherwise, skip this step.
OpenSSL is not supported.
cygserverfor shared memory support. To do this, enter the command
/usr/sbin/cygserver &. This program needs to be running anytime you start the PostgreSQL server or initialize a database cluster (
initdb). The default
cygserverconfiguration may need to be changed (e.g., increase
SEMMNS) to prevent PostgreSQL from failing due to a lack of system resources.
Building might fail on some systems where a locale other than C is in use. To fix this, set the locale to C by doing
export LANG=C.utf8before building, and then setting it back to the previous setting, after you have installed PostgreSQL.
The parallel regression tests (
make check) can generate spurious regression test failures due to overflowing the
listen()backlog queue which causes connection refused errors or hangs. You can limit the number of connections using the make variable
make MAX_CONNECTIONS=5 check
(On some systems you can have up to about 10 simultaneous connections).
It is possible to install
PostgreSQL server as Windows NT services. For information on how
to do this, please refer to the
document included with the PostgreSQL binary package on Cygwin.
It is installed in the
PostgreSQL 7.3+ should work on Series 700/800 PA-RISC machines running HP-UX 10.X or 11.X, given appropriate system patch levels and build tools. At least one developer routinely tests on HP-UX 10.20, and we have reports of successful installations on HP-UX 11.00 and 11.11.
Aside from the PostgreSQL source distribution, you will need GNU
make (HP's make will not do), and either GCC or HP's full ANSI C
compiler. If you intend to build from Git sources rather than a
distribution tarball, you will also need Flex (GNU lex) and Bison
(GNU yacc). We also recommend making sure you are fairly
up-to-date on HP patches. At a minimum, if you are building 64
bit binaries on HP-UX 11.11 you may need PHSS_30966 (11.11) or a
successor patch otherwise
PHSS_30966 s700_800 ld(1) and linker tools cumulative patch
On general principles you should be current on libc and ld/dld patches, as well as compiler patches if you are using HP's C compiler. See HP's support sites such as ftp://us-ffs.external.hp.com/ for free copies of their latest patches.
If you are building on a PA-RISC 2.0 machine and want to have 64-bit binaries using GCC, you must use a GCC 64-bit version.
If you are building on a PA-RISC 2.0 machine and want the compiled
binaries to run on PA-RISC 1.1 machines you will need to specify
If you are building on a HP-UX Itanium machine, you will need the latest HP ANSI C compiler with its dependent patch or successor patches:
PHSS_30848 s700_800 HP C Compiler (A.05.57)
PHSS_30849 s700_800 u2comp/be/plugin library Patch
If you have both HP's C compiler and GCC's, then you might want to
explicitly select the compiler to use when you
for HP's C compiler, or
for GCC. If you omit this setting, then configure will
if it has a choice.
The default install target location
, which you might want to
change to something under
. If so, use
In the regression tests, there might be some low-order-digit differences in the geometry tests, which vary depending on which compiler and math library versions you use. Any other error is cause for suspicion.
To build PostgreSQL from source on macOS , you will need to install Apple's command line developer tools, which can be done by issuing
(note that this will pop up a GUI dialog window for confirmation). You may or may not wish to also install Xcode.
releases, it's necessary to
path in the include switches used to
find some system header files. This results in the outputs of
script varying depending on
which SDK version was used during
That shouldn't pose any problem in simple scenarios, but if you are
trying to do something like building an extension on a different machine
than the server code was built on, you may need to force use of a
different sysroot path. To do that, set
To find out the appropriate path on your machine, run
Note that building an extension using a different sysroot version than was used to build the core server is not really recommended; in the worst case it could result in hard-to-debug ABI inconsistencies.
You can also select a non-default sysroot path when configuring, by
./configure ... PG_SYSROOT=
This would primarily be useful to cross-compile for some other macOS version. There is no guarantee that the resulting executables will run on the current host.
To suppress the
options altogether, use
./configure ... PG_SYSROOT=none
(any nonexistent pathname will work). This might be useful if you wish to build with a non-Apple compiler, but beware that that case is not tested or supported by the PostgreSQL developers.
(SIP) feature breaks
because it prevents passing the needed setting
down to the executables being
tested. You can work around that by doing
Most Postgres developers just turn off SIP, though.
16.7.5. MinGW/Native Windows
PostgreSQL for Windows can be built using MinGW, a Unix-like build environment for Microsoft operating systems, or using Microsoft's Visual C++ compiler suite. The MinGW build variant uses the normal build system described in this chapter; the Visual C++ build works completely differently and is described in Chapter 17 . It is a fully native build and uses no additional software like MinGW. A ready-made installer is available on the main PostgreSQL web site.
The native Windows port requires a 32 or 64-bit version of Windows
2000 or later. Earlier operating systems do
not have sufficient infrastructure (but Cygwin may be used on
those). MinGW, the Unix-like build tools, and MSYS, a collection
of Unix tools required to run shell scripts
, can be downloaded
. Neither is
required to run the resulting binaries; they are needed only for
creating the binaries.
To build 64 bit binaries using MinGW, install the 64 bit tool set
, put its bin
directory in the
, and run
After you have everything installed, it is suggested that you
, as the MSYS console has
220.127.116.11. Collecting Crash Dumps on Windows
If PostgreSQL on Windows crashes, it has the ability to generate
that can be used to track down the cause
for the crash, similar to core dumps on Unix. These dumps can be
read using the
Windows Debugger Tools
. To enable the generation of dumps
on Windows, create a subdirectory named
inside the cluster data directory. The dumps will then be written
into this directory with a unique name based on the identifier of
the crashing process and the current time of the crash.
PostgreSQL is well-supported on Solaris. The more up to date your operating system, the fewer issues you will experience; details below.
18.104.22.168. Required Tools
You can build with either GCC or Sun's compiler suite. For
better code optimization, Sun's compiler is strongly recommended
on the SPARC architecture. We have heard reports of problems
when using GCC 2.95.1; GCC 2.95.3 or later is recommended. If
you are using Sun's compiler, be careful not to select
You can download Sun Studio from https://www.oracle.com/technetwork/server-storage/solarisstudio/downloads/ . Many of GNU tools are integrated into Solaris 10, or they are present on the Solaris companion CD. If you like packages for older version of Solaris, you can find these tools at http://www.sunfreeware.com . If you prefer sources, look at https://www.gnu.org/prep/ftp .
22.214.171.124. configure Complains About a Failed Test Program
complains about a failed test
program, this is probably a case of the run-time linker being
unable to find some library, probably libz, libreadline or some
other non-standard library such as libssl. To point it to the
right location, set the
variable on the
command line, e.g.,
configure ... LDFLAGS="-R /usr/sfw/lib:/opt/sfw/lib:/usr/local/lib"
See the ld man page for more information.
126.96.36.199. 64-bit Build Sometimes Crashes
On Solaris 7 and older, the 64-bit version of libc has a buggy
routine, which leads to erratic
core dumps in PostgreSQL. The simplest known workaround is to
force PostgreSQL to use its own version of
the library copy. To do this, after you
edit a file produced by
, change the line
LIBOBJS = snprintf.o
(There might be other files already listed in this variable. Order does not matter.) Then build as usual.
188.8.131.52. Compiling for Optimal Performance
On the SPARC architecture, Sun Studio is strongly recommended for
compilation. Try using the
flag to generate significantly faster binaries. Do not use any
flags that modify behavior of floating-point operations
). These flags could raise some
nonstandard PostgreSQL behavior for example in the date/time
If you do not have a reason to use 64-bit binaries on SPARC, prefer the 32-bit version. The 64-bit operations are slower and 64-bit binaries are slower than the 32-bit variants. And on other hand, 32-bit code on the AMD64 CPU family is not native, and that is why 32-bit code is significant slower on this CPU family.
184.108.40.206. Using DTrace for Tracing PostgreSQL
Yes, using DTrace is possible. See Section 28.5 for further information.
If you see the linking of the
executable abort with an
error message like:
Undefined first referenced symbol in file AbortTransaction utils/probes.o CommitTransaction utils/probes.o ld: fatal: Symbol referencing errors. No output written to postgres collect2: ld returned 1 exit status make: *** [postgres] Error 1
your DTrace installation is too old to handle probes in static functions. You need Solaris 10u4 or newer.