PostgreSQL: The World's Most Advanced Open Source Relational Database

9.27. System Administration Functions
Prev	Up	Chapter 9. Functions and Operators	Home	Next

9.27.1. Configuration Settings Functions

Table 9.87 shows the functions available to query and alter run-time configuration parameters.

Table 9.87. Configuration Settings Functions

Function Description Example(s)
`current_setting` ( `setting_name` `text` [ , `missing_ok` `boolean` ] ) → `text` Returns the current value of the setting `setting_name` . If there is no such setting, `current_setting` throws an error unless `missing_ok` is supplied and is `true` (in which case NULL is returned). This function corresponds to the SQL command SHOW . `current_setting('datestyle')` → `ISO, MDY`
`set_config` ( `setting_name` `text` , `new_value` `text` , `is_local` `boolean` ) → `text` Sets the parameter `setting_name` to `new_value` , and returns that value. If `is_local` is `true` , the new value will only apply during the current transaction. If you want the new value to apply for the rest of the current session, use `false` instead. This function corresponds to the SQL command SET . `set_config('log_statement_stats', 'off', false)` → `off`

Function

Description

Example(s)

current_setting ( setting_name text [ , missing_ok boolean ] ) → text

Returns the current value of the setting setting_name . If there is no such setting, current_setting throws an error unless missing_ok is supplied and is true (in which case NULL is returned). This function corresponds to the SQL command SHOW .

current_setting('datestyle') → ISO, MDY

set_config ( setting_name text , new_value text , is_local boolean ) → text

Sets the parameter setting_name to new_value , and returns that value. If is_local is true , the new value will only apply during the current transaction. If you want the new value to apply for the rest of the current session, use false instead. This function corresponds to the SQL command SET .

set_config('log_statement_stats', 'off', false) → off

9.27.2. Server Signaling Functions

The functions shown in Table 9.88 send control signals to other server processes. Use of these functions is restricted to superusers by default but access may be granted to others using GRANT , with noted exceptions.

Each of these functions returns true if the signal was successfully sent and false if sending the signal failed.

Table 9.88. Server Signaling Functions

Function Description
`pg_cancel_backend` ( `pid` `integer` ) → `boolean` Cancels the current query of the session whose backend process has the specified process ID. This is also allowed if the calling role is a member of the role whose backend is being canceled or the calling role has privileges of `pg_signal_backend` , however only superusers can cancel superuser backends.
`pg_log_backend_memory_contexts` ( `pid` `integer` ) → `boolean` Requests to log the memory contexts of the backend with the specified process ID. This function can send the request to backends and auxiliary processes except logger. These memory contexts will be logged at `LOG` message level. They will appear in the server log based on the log configuration set (see Section 20.8 for more information), but will not be sent to the client regardless of client_min_messages .
`pg_reload_conf` () → `boolean` Causes all processes of the PostgreSQL server to reload their configuration files. (This is initiated by sending a SIGHUP signal to the postmaster process, which in turn sends SIGHUP to each of its children.) You can use the `pg_file_settings` , `pg_hba_file_rules` and `pg_ident_file_mappings` views to check the configuration files for possible errors, before reloading.
`pg_rotate_logfile` () → `boolean` Signals the log-file manager to switch to a new output file immediately. This works only when the built-in log collector is running, since otherwise there is no log-file manager subprocess.
`pg_terminate_backend` ( `pid` `integer` , `timeout` `bigint` `DEFAULT` `0` ) → `boolean` Terminates the session whose backend process has the specified process ID. This is also allowed if the calling role is a member of the role whose backend is being terminated or the calling role has privileges of `pg_signal_backend` , however only superusers can terminate superuser backends. If `timeout` is not specified or zero, this function returns `true` whether the process actually terminates or not, indicating only that the sending of the signal was successful. If the `timeout` is specified (in milliseconds) and greater than zero, the function waits until the process is actually terminated or until the given time has passed. If the process is terminated, the function returns `true` . On timeout, a warning is emitted and `false` is returned.

Function

Description

pg_cancel_backend ( pid integer ) → boolean

Cancels the current query of the session whose backend process has the specified process ID. This is also allowed if the calling role is a member of the role whose backend is being canceled or the calling role has privileges of pg_signal_backend , however only superusers can cancel superuser backends.

pg_log_backend_memory_contexts ( pid integer ) → boolean

Requests to log the memory contexts of the backend with the specified process ID. This function can send the request to backends and auxiliary processes except logger. These memory contexts will be logged at LOG message level. They will appear in the server log based on the log configuration set (see Section 20.8 for more information), but will not be sent to the client regardless of client_min_messages .

pg_reload_conf () → boolean

Causes all processes of the PostgreSQL server to reload their configuration files. (This is initiated by sending a SIGHUP signal to the postmaster process, which in turn sends SIGHUP to each of its children.) You can use the pg_file_settings , pg_hba_file_rules and pg_ident_file_mappings views to check the configuration files for possible errors, before reloading.

pg_rotate_logfile () → boolean

Signals the log-file manager to switch to a new output file immediately. This works only when the built-in log collector is running, since otherwise there is no log-file manager subprocess.

pg_terminate_backend ( pid integer , timeout bigint DEFAULT 0 ) → boolean

Terminates the session whose backend process has the specified process ID. This is also allowed if the calling role is a member of the role whose backend is being terminated or the calling role has privileges of pg_signal_backend , however only superusers can terminate superuser backends.

If timeout is not specified or zero, this function returns true whether the process actually terminates or not, indicating only that the sending of the signal was successful. If the timeout is specified (in milliseconds) and greater than zero, the function waits until the process is actually terminated or until the given time has passed. If the process is terminated, the function returns true . On timeout, a warning is emitted and false is returned.

pg_cancel_backend and pg_terminate_backend send signals ( SIGINT or SIGTERM respectively) to backend processes identified by process ID. The process ID of an active backend can be found from the pid column of the pg_stat_activity view, or by listing the postgres processes on the server (using ps on Unix or the Task Manager on Windows ). The role of an active backend can be found from the usename column of the pg_stat_activity view.

pg_log_backend_memory_contexts can be used to log the memory contexts of a backend process. For example:

postgres=# SELECT pg_log_backend_memory_contexts(pg_backend_pid());
 pg_log_backend_memory_contexts
--------------------------------
 t
(1 row)

One message for each memory context will be logged. For example:

LOG:  logging memory contexts of PID 10377
STATEMENT:  SELECT pg_log_backend_memory_contexts(pg_backend_pid());
LOG:  level: 0; TopMemoryContext: 80800 total in 6 blocks; 14432 free (5 chunks); 66368 used
LOG:  level: 1; pgstat TabStatusArray lookup hash table: 8192 total in 1 blocks; 1408 free (0 chunks); 6784 used
LOG:  level: 1; TopTransactionContext: 8192 total in 1 blocks; 7720 free (1 chunks); 472 used
LOG:  level: 1; RowDescriptionContext: 8192 total in 1 blocks; 6880 free (0 chunks); 1312 used
LOG:  level: 1; MessageContext: 16384 total in 2 blocks; 5152 free (0 chunks); 11232 used
LOG:  level: 1; Operator class cache: 8192 total in 1 blocks; 512 free (0 chunks); 7680 used
LOG:  level: 1; smgr relation table: 16384 total in 2 blocks; 4544 free (3 chunks); 11840 used
LOG:  level: 1; TransactionAbortContext: 32768 total in 1 blocks; 32504 free (0 chunks); 264 used
...
LOG:  level: 1; ErrorContext: 8192 total in 1 blocks; 7928 free (3 chunks); 264 used
LOG:  Grand total: 1651920 bytes in 201 blocks; 622360 free (88 chunks); 1029560 used

If there are more than 100 child contexts under the same parent, the first 100 child contexts are logged, along with a summary of the remaining contexts. Note that frequent calls to this function could incur significant overhead, because it may generate a large number of log messages.

9.27.3. Backup Control Functions

The functions shown in Table 9.89 assist in making on-line backups. These functions cannot be executed during recovery (except pg_backup_start , pg_backup_stop , and pg_wal_lsn_diff ).

For details about proper usage of these functions, see Section 26.3 .

Table 9.89. Backup Control Functions

Function Description
`pg_create_restore_point` ( `name` `text` ) → `pg_lsn` Creates a named marker record in the write-ahead log that can later be used as a recovery target, and returns the corresponding write-ahead log location. The given name can then be used with recovery_target_name to specify the point up to which recovery will proceed. Avoid creating multiple restore points with the same name, since recovery will stop at the first one whose name matches the recovery target. This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
`pg_current_wal_flush_lsn` () → `pg_lsn` Returns the current write-ahead log flush location (see notes below).
`pg_current_wal_insert_lsn` () → `pg_lsn` Returns the current write-ahead log insert location (see notes below).
`pg_current_wal_lsn` () → `pg_lsn` Returns the current write-ahead log write location (see notes below).
`pg_backup_start` ( `label` `text` [ , `fast` `boolean` ] ) → `pg_lsn` Prepares the server to begin an on-line backup. The only required parameter is an arbitrary user-defined label for the backup. (Typically this would be the name under which the backup dump file will be stored.) If the optional second parameter is given as `true` , it specifies executing `pg_backup_start` as quickly as possible. This forces an immediate checkpoint which will cause a spike in I/O operations, slowing any concurrently executing queries. This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
`pg_backup_stop` ( [ `wait_for_archive` `boolean` ] ) → `record` ( `lsn` `pg_lsn` , `labelfile` `text` , `spcmapfile` `text` ) Finishes performing an on-line backup. The desired contents of the backup label file and the tablespace map file are returned as part of the result of the function and must be written to files in the backup area. These files must not be written to the live data directory (doing so will cause PostgreSQL to fail to restart in the event of a crash). There is an optional parameter of type `boolean` . If false, the function will return immediately after the backup is completed, without waiting for WAL to be archived. This behavior is only useful with backup software that independently monitors WAL archiving. Otherwise, WAL required to make the backup consistent might be missing and make the backup useless. By default or when this parameter is true, `pg_backup_stop` will wait for WAL to be archived when archiving is enabled. (On a standby, this means that it will wait only when `archive_mode` = `always` . If write activity on the primary is low, it may be useful to run `pg_switch_wal` on the primary in order to trigger an immediate segment switch.) When executed on a primary, this function also creates a backup history file in the write-ahead log archive area. The history file includes the label given to `pg_backup_start` , the starting and ending write-ahead log locations for the backup, and the starting and ending times of the backup. After recording the ending location, the current write-ahead log insertion point is automatically advanced to the next write-ahead log file, so that the ending write-ahead log file can be archived immediately to complete the backup. The result of the function is a single record. The `lsn` column holds the backup's ending write-ahead log location (which again can be ignored). The second column returns the contents of the backup label file, and the third column returns the contents of the tablespace map file. These must be stored as part of the backup and are required as part of the restore process. This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
`pg_switch_wal` () → `pg_lsn` Forces the server to switch to a new write-ahead log file, which allows the current file to be archived (assuming you are using continuous archiving). The result is the ending write-ahead log location plus 1 within the just-completed write-ahead log file. If there has been no write-ahead log activity since the last write-ahead log switch, `pg_switch_wal` does nothing and returns the start location of the write-ahead log file currently in use. This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
`pg_walfile_name` ( `lsn` `pg_lsn` ) → `text` Converts a write-ahead log location to the name of the WAL file holding that location.
`pg_walfile_name_offset` ( `lsn` `pg_lsn` ) → `record` ( `file_name` `text` , `file_offset` `integer` ) Converts a write-ahead log location to a WAL file name and byte offset within that file.
`pg_wal_lsn_diff` ( `lsn1` `pg_lsn` , `lsn2` `pg_lsn` ) → `numeric` Calculates the difference in bytes ( `lsn1` - `lsn2` ) between two write-ahead log locations. This can be used with `pg_stat_replication` or some of the functions shown in Table 9.89 to get the replication lag.

Function

Description

pg_create_restore_point ( name text ) → pg_lsn

Creates a named marker record in the write-ahead log that can later be used as a recovery target, and returns the corresponding write-ahead log location. The given name can then be used with recovery_target_name to specify the point up to which recovery will proceed. Avoid creating multiple restore points with the same name, since recovery will stop at the first one whose name matches the recovery target.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_current_wal_flush_lsn () → pg_lsn

Returns the current write-ahead log flush location (see notes below).

pg_current_wal_insert_lsn () → pg_lsn

Returns the current write-ahead log insert location (see notes below).

pg_current_wal_lsn () → pg_lsn

Returns the current write-ahead log write location (see notes below).

pg_backup_start ( label text [ , fast boolean ] ) → pg_lsn

Prepares the server to begin an on-line backup. The only required parameter is an arbitrary user-defined label for the backup. (Typically this would be the name under which the backup dump file will be stored.) If the optional second parameter is given as true , it specifies executing pg_backup_start as quickly as possible. This forces an immediate checkpoint which will cause a spike in I/O operations, slowing any concurrently executing queries.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_backup_stop ( [ wait_for_archive boolean ] ) → record ( lsn pg_lsn , labelfile text , spcmapfile text )

Finishes performing an on-line backup. The desired contents of the backup label file and the tablespace map file are returned as part of the result of the function and must be written to files in the backup area. These files must not be written to the live data directory (doing so will cause PostgreSQL to fail to restart in the event of a crash).

There is an optional parameter of type boolean . If false, the function will return immediately after the backup is completed, without waiting for WAL to be archived. This behavior is only useful with backup software that independently monitors WAL archiving. Otherwise, WAL required to make the backup consistent might be missing and make the backup useless. By default or when this parameter is true, pg_backup_stop will wait for WAL to be archived when archiving is enabled. (On a standby, this means that it will wait only when archive_mode = always . If write activity on the primary is low, it may be useful to run pg_switch_wal on the primary in order to trigger an immediate segment switch.)

When executed on a primary, this function also creates a backup history file in the write-ahead log archive area. The history file includes the label given to pg_backup_start , the starting and ending write-ahead log locations for the backup, and the starting and ending times of the backup. After recording the ending location, the current write-ahead log insertion point is automatically advanced to the next write-ahead log file, so that the ending write-ahead log file can be archived immediately to complete the backup.

The result of the function is a single record. The lsn column holds the backup's ending write-ahead log location (which again can be ignored). The second column returns the contents of the backup label file, and the third column returns the contents of the tablespace map file. These must be stored as part of the backup and are required as part of the restore process.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_switch_wal () → pg_lsn

Forces the server to switch to a new write-ahead log file, which allows the current file to be archived (assuming you are using continuous archiving). The result is the ending write-ahead log location plus 1 within the just-completed write-ahead log file. If there has been no write-ahead log activity since the last write-ahead log switch, pg_switch_wal does nothing and returns the start location of the write-ahead log file currently in use.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_walfile_name ( lsn pg_lsn ) → text

Converts a write-ahead log location to the name of the WAL file holding that location.

pg_walfile_name_offset ( lsn pg_lsn ) → record ( file_name text , file_offset integer )

Converts a write-ahead log location to a WAL file name and byte offset within that file.

pg_wal_lsn_diff ( lsn1 pg_lsn , lsn2 pg_lsn ) → numeric

Calculates the difference in bytes ( lsn1 - lsn2 ) between two write-ahead log locations. This can be used with pg_stat_replication or some of the functions shown in Table 9.89 to get the replication lag.

pg_current_wal_lsn displays the current write-ahead log write location in the same format used by the above functions. Similarly, pg_current_wal_insert_lsn displays the current write-ahead log insertion location and pg_current_wal_flush_lsn displays the current write-ahead log flush location. The insertion location is the " logical " end of the write-ahead log at any instant, while the write location is the end of what has actually been written out from the server's internal buffers, and the flush location is the last location known to be written to durable storage. The write location is the end of what can be examined from outside the server, and is usually what you want if you are interested in archiving partially-complete write-ahead log files. The insertion and flush locations are made available primarily for server debugging purposes. These are all read-only operations and do not require superuser permissions.

You can use pg_walfile_name_offset to extract the corresponding write-ahead log file name and byte offset from a pg_lsn value. For example:

postgres=# SELECT * FROM pg_walfile_name_offset((pg_backup_stop()).lsn);
        file_name         | file_offset
--------------------------+-------------
 00000001000000000000000D |     4039624
(1 row)

Similarly, pg_walfile_name extracts just the write-ahead log file name. When the given write-ahead log location is exactly at a write-ahead log file boundary, both these functions return the name of the preceding write-ahead log file. This is usually the desired behavior for managing write-ahead log archiving behavior, since the preceding file is the last one that currently needs to be archived.

9.27.4. Recovery Control Functions

The functions shown in Table 9.90 provide information about the current status of a standby server. These functions may be executed both during recovery and in normal running.

Table 9.90. Recovery Information Functions

Function Description
`pg_is_in_recovery` () → `boolean` Returns true if recovery is still in progress.
`pg_last_wal_receive_lsn` () → `pg_lsn` Returns the last write-ahead log location that has been received and synced to disk by streaming replication. While streaming replication is in progress this will increase monotonically. If recovery has completed then this will remain static at the location of the last WAL record received and synced to disk during recovery. If streaming replication is disabled, or if it has not yet started, the function returns `NULL` .
`pg_last_wal_replay_lsn` () → `pg_lsn` Returns the last write-ahead log location that has been replayed during recovery. If recovery is still in progress this will increase monotonically. If recovery has completed then this will remain static at the location of the last WAL record applied during recovery. When the server has been started normally without recovery, the function returns `NULL` .
`pg_last_xact_replay_timestamp` () → `timestamp with time zone` Returns the time stamp of the last transaction replayed during recovery. This is the time at which the commit or abort WAL record for that transaction was generated on the primary. If no transactions have been replayed during recovery, the function returns `NULL` . Otherwise, if recovery is still in progress this will increase monotonically. If recovery has completed then this will remain static at the time of the last transaction applied during recovery. When the server has been started normally without recovery, the function returns `NULL` .
`pg_get_wal_resource_managers` () → `setof record` ( `rm_id` `integer` , `rm_name` `text` , `rm_builtin` `boolean` ) Returns the currently-loaded WAL resource managers in the system. The column `rm_builtin` indicates whether it's a built-in resource manager, or a custom resource manager loaded by an extension.

Function

Description

pg_is_in_recovery () → boolean

Returns true if recovery is still in progress.

pg_last_wal_receive_lsn () → pg_lsn

Returns the last write-ahead log location that has been received and synced to disk by streaming replication. While streaming replication is in progress this will increase monotonically. If recovery has completed then this will remain static at the location of the last WAL record received and synced to disk during recovery. If streaming replication is disabled, or if it has not yet started, the function returns NULL .

pg_last_wal_replay_lsn () → pg_lsn

Returns the last write-ahead log location that has been replayed during recovery. If recovery is still in progress this will increase monotonically. If recovery has completed then this will remain static at the location of the last WAL record applied during recovery. When the server has been started normally without recovery, the function returns NULL .

pg_last_xact_replay_timestamp () → timestamp with time zone

Returns the time stamp of the last transaction replayed during recovery. This is the time at which the commit or abort WAL record for that transaction was generated on the primary. If no transactions have been replayed during recovery, the function returns NULL . Otherwise, if recovery is still in progress this will increase monotonically. If recovery has completed then this will remain static at the time of the last transaction applied during recovery. When the server has been started normally without recovery, the function returns NULL .

pg_get_wal_resource_managers () → setof record ( rm_id integer , rm_name text , rm_builtin boolean )

Returns the currently-loaded WAL resource managers in the system. The column rm_builtin indicates whether it's a built-in resource manager, or a custom resource manager loaded by an extension.

The functions shown in Table 9.91 control the progress of recovery. These functions may be executed only during recovery.

Table 9.91. Recovery Control Functions

Function Description
`pg_is_wal_replay_paused` () → `boolean` Returns true if recovery pause is requested.
`pg_get_wal_replay_pause_state` () → `text` Returns recovery pause state. The return values are `not paused` if pause is not requested, `pause requested` if pause is requested but recovery is not yet paused, and `paused` if the recovery is actually paused.
`pg_promote` ( `wait` `boolean` `DEFAULT` `true` , `wait_seconds` `integer` `DEFAULT` `60` ) → `boolean` Promotes a standby server to primary status. With `wait` set to `true` (the default), the function waits until promotion is completed or `wait_seconds` seconds have passed, and returns `true` if promotion is successful and `false` otherwise. If `wait` is set to `false` , the function returns `true` immediately after sending a `SIGUSR1` signal to the postmaster to trigger promotion. This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
`pg_wal_replay_pause` () → `void` Request to pause recovery. A request doesn't mean that recovery stops right away. If you want a guarantee that recovery is actually paused, you need to check for the recovery pause state returned by `pg_get_wal_replay_pause_state()` . Note that `pg_is_wal_replay_paused()` returns whether a request is made. While recovery is paused, no further database changes are applied. If hot standby is active, all new queries will see the same consistent snapshot of the database, and no further query conflicts will be generated until recovery is resumed. This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
`pg_wal_replay_resume` () → `void` Restarts recovery if it was paused. This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

Function

Description

pg_is_wal_replay_paused () → boolean

Returns true if recovery pause is requested.

pg_get_wal_replay_pause_state () → text

Returns recovery pause state. The return values are not paused if pause is not requested, pause requested if pause is requested but recovery is not yet paused, and paused if the recovery is actually paused.

pg_promote ( wait boolean DEFAULT true , wait_seconds integer DEFAULT 60 ) → boolean

Promotes a standby server to primary status. With wait set to true (the default), the function waits until promotion is completed or wait_seconds seconds have passed, and returns true if promotion is successful and false otherwise. If wait is set to false , the function returns true immediately after sending a SIGUSR1 signal to the postmaster to trigger promotion.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_wal_replay_pause () → void

Request to pause recovery. A request doesn't mean that recovery stops right away. If you want a guarantee that recovery is actually paused, you need to check for the recovery pause state returned by pg_get_wal_replay_pause_state() . Note that pg_is_wal_replay_paused() returns whether a request is made. While recovery is paused, no further database changes are applied. If hot standby is active, all new queries will see the same consistent snapshot of the database, and no further query conflicts will be generated until recovery is resumed.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_wal_replay_resume () → void

Restarts recovery if it was paused.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_wal_replay_pause and pg_wal_replay_resume cannot be executed while a promotion is ongoing. If a promotion is triggered while recovery is paused, the paused state ends and promotion continues.

If streaming replication is disabled, the paused state may continue indefinitely without a problem. If streaming replication is in progress then WAL records will continue to be received, which will eventually fill available disk space, depending upon the duration of the pause, the rate of WAL generation and available disk space.

9.27.5. Snapshot Synchronization Functions

PostgreSQL allows database sessions to synchronize their snapshots. A snapshot determines which data is visible to the transaction that is using the snapshot. Synchronized snapshots are necessary when two or more sessions need to see identical content in the database. If two sessions just start their transactions independently, there is always a possibility that some third transaction commits between the executions of the two START TRANSACTION commands, so that one session sees the effects of that transaction and the other does not.

To solve this problem, PostgreSQL allows a transaction to export the snapshot it is using. As long as the exporting transaction remains open, other transactions can import its snapshot, and thereby be guaranteed that they see exactly the same view of the database that the first transaction sees. But note that any database changes made by any one of these transactions remain invisible to the other transactions, as is usual for changes made by uncommitted transactions. So the transactions are synchronized with respect to pre-existing data, but act normally for changes they make themselves.

Snapshots are exported with the pg_export_snapshot function, shown in Table 9.92 , and imported with the SET TRANSACTION command.

Table 9.92. Snapshot Synchronization Functions

Function Description
`pg_export_snapshot` () → `text` Saves the transaction's current snapshot and returns a `text` string identifying the snapshot. This string must be passed (outside the database) to clients that want to import the snapshot. The snapshot is available for import only until the end of the transaction that exported it. A transaction can export more than one snapshot, if needed. Note that doing so is only useful in `READ COMMITTED` transactions, since in `REPEATABLE READ` and higher isolation levels, transactions use the same snapshot throughout their lifetime. Once a transaction has exported any snapshots, it cannot be prepared with PREPARE TRANSACTION .

Function

Description

pg_export_snapshot () → text

Saves the transaction's current snapshot and returns a text string identifying the snapshot. This string must be passed (outside the database) to clients that want to import the snapshot. The snapshot is available for import only until the end of the transaction that exported it.

A transaction can export more than one snapshot, if needed. Note that doing so is only useful in READ COMMITTED transactions, since in REPEATABLE READ and higher isolation levels, transactions use the same snapshot throughout their lifetime. Once a transaction has exported any snapshots, it cannot be prepared with PREPARE TRANSACTION .

9.27.6. Replication Management Functions

The functions shown in Table 9.93 are for controlling and interacting with replication features. See Section 27.2.5 , Section 27.2.6 , and Chapter 50 for information about the underlying features. Use of functions for replication origin is only allowed to the superuser by default, but may be allowed to other users by using the GRANT command. Use of functions for replication slots is restricted to superusers and users having REPLICATION privilege.

Many of these functions have equivalent commands in the replication protocol; see Section 55.4 .

The functions described in Section 9.27.3 , Section 9.27.4 , and Section 9.27.5 are also relevant for replication.

Table 9.93. Replication Management Functions

Function Description
`pg_create_physical_replication_slot` ( `slot_name` `name` [ , `immediately_reserve` `boolean` , `temporary` `boolean` ] ) → `record` ( `slot_name` `name` , `lsn` `pg_lsn` ) Creates a new physical replication slot named `slot_name` . The optional second parameter, when `true` , specifies that the LSN for this replication slot be reserved immediately; otherwise the LSN is reserved on first connection from a streaming replication client. Streaming changes from a physical slot is only possible with the streaming-replication protocol - see Section 55.4 . The optional third parameter, `temporary` , when set to true, specifies that the slot should not be permanently stored to disk and is only meant for use by the current session. Temporary slots are also released upon any error. This function corresponds to the replication protocol command `CREATE_REPLICATION_SLOT ... PHYSICAL` .
`pg_drop_replication_slot` ( `slot_name` `name` ) → `void` Drops the physical or logical replication slot named `slot_name` . Same as replication protocol command `DROP_REPLICATION_SLOT` . For logical slots, this must be called while connected to the same database the slot was created on.
`pg_create_logical_replication_slot` ( `slot_name` `name` , `plugin` `name` [ , `temporary` `boolean` , `twophase` `boolean` ] ) → `record` ( `slot_name` `name` , `lsn` `pg_lsn` ) Creates a new logical (decoding) replication slot named `slot_name` using the output plugin `plugin` . The optional third parameter, `temporary` , when set to true, specifies that the slot should not be permanently stored to disk and is only meant for use by the current session. Temporary slots are also released upon any error. The optional fourth parameter, `twophase` , when set to true, specifies that the decoding of prepared transactions is enabled for this slot. A call to this function has the same effect as the replication protocol command `CREATE_REPLICATION_SLOT ... LOGICAL` .
`pg_copy_physical_replication_slot` ( `src_slot_name` `name` , `dst_slot_name` `name` [ , `temporary` `boolean` ] ) → `record` ( `slot_name` `name` , `lsn` `pg_lsn` ) Copies an existing physical replication slot named `src_slot_name` to a physical replication slot named `dst_slot_name` . The copied physical slot starts to reserve WAL from the same LSN as the source slot. `temporary` is optional. If `temporary` is omitted, the same value as the source slot is used.
`pg_copy_logical_replication_slot` ( `src_slot_name` `name` , `dst_slot_name` `name` [ , `temporary` `boolean` [ , `plugin` `name` ] ] ) → `record` ( `slot_name` `name` , `lsn` `pg_lsn` ) Copies an existing logical replication slot named `src_slot_name` to a logical replication slot named `dst_slot_name` , optionally changing the output plugin and persistence. The copied logical slot starts from the same LSN as the source logical slot. Both `temporary` and `plugin` are optional; if they are omitted, the values of the source slot are used.
`pg_logical_slot_get_changes` ( `slot_name` `name` , `upto_lsn` `pg_lsn` , `upto_nchanges` `integer` , `VARIADIC` `options` `text[]` ) → `setof record` ( `lsn` `pg_lsn` , `xid` `xid` , `data` `text` ) Returns changes in the slot `slot_name` , starting from the point from which changes have been consumed last. If `upto_lsn` and `upto_nchanges` are NULL, logical decoding will continue until end of WAL. If `upto_lsn` is non-NULL, decoding will include only those transactions which commit prior to the specified LSN. If `upto_nchanges` is non-NULL, decoding will stop when the number of rows produced by decoding exceeds the specified value. Note, however, that the actual number of rows returned may be larger, since this limit is only checked after adding the rows produced when decoding each new transaction commit.
`pg_logical_slot_peek_changes` ( `slot_name` `name` , `upto_lsn` `pg_lsn` , `upto_nchanges` `integer` , `VARIADIC` `options` `text[]` ) → `setof record` ( `lsn` `pg_lsn` , `xid` `xid` , `data` `text` ) Behaves just like the `pg_logical_slot_get_changes()` function, except that changes are not consumed; that is, they will be returned again on future calls.
`pg_logical_slot_get_binary_changes` ( `slot_name` `name` , `upto_lsn` `pg_lsn` , `upto_nchanges` `integer` , `VARIADIC` `options` `text[]` ) → `setof record` ( `lsn` `pg_lsn` , `xid` `xid` , `data` `bytea` ) Behaves just like the `pg_logical_slot_get_changes()` function, except that changes are returned as `bytea` .
`pg_logical_slot_peek_binary_changes` ( `slot_name` `name` , `upto_lsn` `pg_lsn` , `upto_nchanges` `integer` , `VARIADIC` `options` `text[]` ) → `setof record` ( `lsn` `pg_lsn` , `xid` `xid` , `data` `bytea` ) Behaves just like the `pg_logical_slot_peek_changes()` function, except that changes are returned as `bytea` .
`pg_replication_slot_advance` ( `slot_name` `name` , `upto_lsn` `pg_lsn` ) → `record` ( `slot_name` `name` , `end_lsn` `pg_lsn` ) Advances the current confirmed position of a replication slot named `slot_name` . The slot will not be moved backwards, and it will not be moved beyond the current insert location. Returns the name of the slot and the actual position that it was advanced to. The updated slot position information is written out at the next checkpoint if any advancing is done. So in the event of a crash, the slot may return to an earlier position.
`pg_replication_origin_create` ( `node_name` `text` ) → `oid` Creates a replication origin with the given external name, and returns the internal ID assigned to it.
`pg_replication_origin_drop` ( `node_name` `text` ) → `void` Deletes a previously-created replication origin, including any associated replay progress.
`pg_replication_origin_oid` ( `node_name` `text` ) → `oid` Looks up a replication origin by name and returns the internal ID. If no such replication origin is found, `NULL` is returned.
`pg_replication_origin_session_setup` ( `node_name` `text` ) → `void` Marks the current session as replaying from the given origin, allowing replay progress to be tracked. Can only be used if no origin is currently selected. Use `pg_replication_origin_session_reset` to undo.
`pg_replication_origin_session_reset` () → `void` Cancels the effects of `pg_replication_origin_session_setup()` .
`pg_replication_origin_session_is_setup` () → `boolean` Returns true if a replication origin has been selected in the current session.
`pg_replication_origin_session_progress` ( `flush` `boolean` ) → `pg_lsn` Returns the replay location for the replication origin selected in the current session. The parameter `flush` determines whether the corresponding local transaction will be guaranteed to have been flushed to disk or not.
`pg_replication_origin_xact_setup` ( `origin_lsn` `pg_lsn` , `origin_timestamp` `timestamp with time zone` ) → `void` Marks the current transaction as replaying a transaction that has committed at the given LSN and timestamp. Can only be called when a replication origin has been selected using `pg_replication_origin_session_setup` .
`pg_replication_origin_xact_reset` () → `void` Cancels the effects of `pg_replication_origin_xact_setup()` .
`pg_replication_origin_advance` ( `node_name` `text` , `lsn` `pg_lsn` ) → `void` Sets replication progress for the given node to the given location. This is primarily useful for setting up the initial location, or setting a new location after configuration changes and similar. Be aware that careless use of this function can lead to inconsistently replicated data.
`pg_replication_origin_progress` ( `node_name` `text` , `flush` `boolean` ) → `pg_lsn` Returns the replay location for the given replication origin. The parameter `flush` determines whether the corresponding local transaction will be guaranteed to have been flushed to disk or not.
`pg_logical_emit_message` ( `transactional` `boolean` , `prefix` `text` , `content` `text` ) → `pg_lsn` `pg_logical_emit_message` ( `transactional` `boolean` , `prefix` `text` , `content` `bytea` ) → `pg_lsn` Emits a logical decoding message. This can be used to pass generic messages to logical decoding plugins through WAL. The `transactional` parameter specifies if the message should be part of the current transaction, or if it should be written immediately and decoded as soon as the logical decoder reads the record. The `prefix` parameter is a textual prefix that can be used by logical decoding plugins to easily recognize messages that are interesting for them. The `content` parameter is the content of the message, given either in text or binary form.

Function

Description

pg_create_physical_replication_slot ( slot_name name [ , immediately_reserve boolean , temporary boolean ] ) → record ( slot_name name , lsn pg_lsn )

Creates a new physical replication slot named slot_name . The optional second parameter, when true , specifies that the LSN for this replication slot be reserved immediately; otherwise the LSN is reserved on first connection from a streaming replication client. Streaming changes from a physical slot is only possible with the streaming-replication protocol - see Section 55.4 . The optional third parameter, temporary , when set to true, specifies that the slot should not be permanently stored to disk and is only meant for use by the current session. Temporary slots are also released upon any error. This function corresponds to the replication protocol command CREATE_REPLICATION_SLOT ... PHYSICAL .

pg_drop_replication_slot ( slot_name name ) → void

Drops the physical or logical replication slot named slot_name . Same as replication protocol command DROP_REPLICATION_SLOT . For logical slots, this must be called while connected to the same database the slot was created on.

pg_create_logical_replication_slot ( slot_name name , plugin name [ , temporary boolean , twophase boolean ] ) → record ( slot_name name , lsn pg_lsn )

Creates a new logical (decoding) replication slot named slot_name using the output plugin plugin . The optional third parameter, temporary , when set to true, specifies that the slot should not be permanently stored to disk and is only meant for use by the current session. Temporary slots are also released upon any error. The optional fourth parameter, twophase , when set to true, specifies that the decoding of prepared transactions is enabled for this slot. A call to this function has the same effect as the replication protocol command CREATE_REPLICATION_SLOT ... LOGICAL .

pg_copy_physical_replication_slot ( src_slot_name name , dst_slot_name name [ , temporary boolean ] ) → record ( slot_name name , lsn pg_lsn )

Copies an existing physical replication slot named src_slot_name to a physical replication slot named dst_slot_name . The copied physical slot starts to reserve WAL from the same LSN as the source slot. temporary is optional. If temporary is omitted, the same value as the source slot is used.

pg_copy_logical_replication_slot ( src_slot_name name , dst_slot_name name [ , temporary boolean [ , plugin name ] ] ) → record ( slot_name name , lsn pg_lsn )

Copies an existing logical replication slot named src_slot_name to a logical replication slot named dst_slot_name , optionally changing the output plugin and persistence. The copied logical slot starts from the same LSN as the source logical slot. Both temporary and plugin are optional; if they are omitted, the values of the source slot are used.

pg_logical_slot_get_changes ( slot_name name , upto_lsn pg_lsn , upto_nchanges integer , VARIADIC options text[] ) → setof record ( lsn pg_lsn , xid xid , data text )

Returns changes in the slot slot_name , starting from the point from which changes have been consumed last. If upto_lsn and upto_nchanges are NULL, logical decoding will continue until end of WAL. If upto_lsn is non-NULL, decoding will include only those transactions which commit prior to the specified LSN. If upto_nchanges is non-NULL, decoding will stop when the number of rows produced by decoding exceeds the specified value. Note, however, that the actual number of rows returned may be larger, since this limit is only checked after adding the rows produced when decoding each new transaction commit.

pg_logical_slot_peek_changes ( slot_name name , upto_lsn pg_lsn , upto_nchanges integer , VARIADIC options text[] ) → setof record ( lsn pg_lsn , xid xid , data text )

Behaves just like the pg_logical_slot_get_changes() function, except that changes are not consumed; that is, they will be returned again on future calls.

pg_logical_slot_get_binary_changes ( slot_name name , upto_lsn pg_lsn , upto_nchanges integer , VARIADIC options text[] ) → setof record ( lsn pg_lsn , xid xid , data bytea )

Behaves just like the pg_logical_slot_get_changes() function, except that changes are returned as bytea .

pg_logical_slot_peek_binary_changes ( slot_name name , upto_lsn pg_lsn , upto_nchanges integer , VARIADIC options text[] ) → setof record ( lsn pg_lsn , xid xid , data bytea )

Behaves just like the pg_logical_slot_peek_changes() function, except that changes are returned as bytea .

pg_replication_slot_advance ( slot_name name , upto_lsn pg_lsn ) → record ( slot_name name , end_lsn pg_lsn )

Advances the current confirmed position of a replication slot named slot_name . The slot will not be moved backwards, and it will not be moved beyond the current insert location. Returns the name of the slot and the actual position that it was advanced to. The updated slot position information is written out at the next checkpoint if any advancing is done. So in the event of a crash, the slot may return to an earlier position.

pg_replication_origin_create ( node_name text ) → oid

Creates a replication origin with the given external name, and returns the internal ID assigned to it.

pg_replication_origin_drop ( node_name text ) → void

Deletes a previously-created replication origin, including any associated replay progress.

pg_replication_origin_oid ( node_name text ) → oid

Looks up a replication origin by name and returns the internal ID. If no such replication origin is found, NULL is returned.

pg_replication_origin_session_setup ( node_name text ) → void

Marks the current session as replaying from the given origin, allowing replay progress to be tracked. Can only be used if no origin is currently selected. Use pg_replication_origin_session_reset to undo.

pg_replication_origin_session_reset () → void

Cancels the effects of pg_replication_origin_session_setup() .

pg_replication_origin_session_is_setup () → boolean

Returns true if a replication origin has been selected in the current session.

pg_replication_origin_session_progress ( flush boolean ) → pg_lsn

Returns the replay location for the replication origin selected in the current session. The parameter flush determines whether the corresponding local transaction will be guaranteed to have been flushed to disk or not.

pg_replication_origin_xact_setup ( origin_lsn pg_lsn , origin_timestamp timestamp with time zone ) → void

Marks the current transaction as replaying a transaction that has committed at the given LSN and timestamp. Can only be called when a replication origin has been selected using pg_replication_origin_session_setup .

pg_replication_origin_xact_reset () → void

Cancels the effects of pg_replication_origin_xact_setup() .

pg_replication_origin_advance ( node_name text , lsn pg_lsn ) → void

Sets replication progress for the given node to the given location. This is primarily useful for setting up the initial location, or setting a new location after configuration changes and similar. Be aware that careless use of this function can lead to inconsistently replicated data.

pg_replication_origin_progress ( node_name text , flush boolean ) → pg_lsn

Returns the replay location for the given replication origin. The parameter flush determines whether the corresponding local transaction will be guaranteed to have been flushed to disk or not.

pg_logical_emit_message ( transactional boolean , prefix text , content text ) → pg_lsn

pg_logical_emit_message ( transactional boolean , prefix text , content bytea ) → pg_lsn

Emits a logical decoding message. This can be used to pass generic messages to logical decoding plugins through WAL. The transactional parameter specifies if the message should be part of the current transaction, or if it should be written immediately and decoded as soon as the logical decoder reads the record. The prefix parameter is a textual prefix that can be used by logical decoding plugins to easily recognize messages that are interesting for them. The content parameter is the content of the message, given either in text or binary form.

9.27.7. Database Object Management Functions

The functions shown in Table 9.94 calculate the disk space usage of database objects, or assist in presentation or understanding of usage results. bigint results are measured in bytes. If an OID that does not represent an existing object is passed to one of these functions, NULL is returned.

Table 9.94. Database Object Size Functions

Function Description
`pg_column_size` ( `"any"` ) → `integer` Shows the number of bytes used to store any individual data value. If applied directly to a table column value, this reflects any compression that was done.
`pg_column_compression` ( `"any"` ) → `text` Shows the compression algorithm that was used to compress an individual variable-length value. Returns `NULL` if the value is not compressed.
`pg_database_size` ( `name` ) → `bigint` `pg_database_size` ( `oid` ) → `bigint` Computes the total disk space used by the database with the specified name or OID. To use this function, you must have `CONNECT` privilege on the specified database (which is granted by default) or have privileges of the `pg_read_all_stats` role.
`pg_indexes_size` ( `regclass` ) → `bigint` Computes the total disk space used by indexes attached to the specified table.
`pg_relation_size` ( `relation` `regclass` [ , `fork` `text` ] ) → `bigint` Computes the disk space used by one " fork " of the specified relation. (Note that for most purposes it is more convenient to use the higher-level functions `pg_total_relation_size` or `pg_table_size` , which sum the sizes of all forks.) With one argument, this returns the size of the main data fork of the relation. The second argument can be provided to specify which fork to examine: `main` returns the size of the main data fork of the relation. `fsm` returns the size of the Free Space Map (see Section 73.3 ) associated with the relation. `vm` returns the size of the Visibility Map (see Section 73.4 ) associated with the relation. `init` returns the size of the initialization fork, if any, associated with the relation.
`pg_size_bytes` ( `text` ) → `bigint` Converts a size in human-readable format (as returned by `pg_size_pretty` ) into bytes.
`pg_size_pretty` ( `bigint` ) → `text` `pg_size_pretty` ( `numeric` ) → `text` Converts a size in bytes into a more easily human-readable format with size units (bytes, kB, MB, GB, TB, or PB as appropriate). Note that the units are powers of 2 rather than powers of 10, so 1kB is 1024 bytes, 1MB is 1024 ² = 1048576 bytes, and so on.
`pg_table_size` ( `regclass` ) → `bigint` Computes the disk space used by the specified table, excluding indexes (but including its TOAST table if any, free space map, and visibility map).
`pg_tablespace_size` ( `name` ) → `bigint` `pg_tablespace_size` ( `oid` ) → `bigint` Computes the total disk space used in the tablespace with the specified name or OID. To use this function, you must have `CREATE` privilege on the specified tablespace or have privileges of the `pg_read_all_stats` role, unless it is the default tablespace for the current database.
`pg_total_relation_size` ( `regclass` ) → `bigint` Computes the total disk space used by the specified table, including all indexes and TOAST data. The result is equivalent to `pg_table_size` `+` `pg_indexes_size` .

Function

Description

pg_column_size ( "any" ) → integer

Shows the number of bytes used to store any individual data value. If applied directly to a table column value, this reflects any compression that was done.

pg_column_compression ( "any" ) → text

Shows the compression algorithm that was used to compress an individual variable-length value. Returns NULL if the value is not compressed.

pg_database_size ( name ) → bigint

pg_database_size ( oid ) → bigint

Computes the total disk space used by the database with the specified name or OID. To use this function, you must have CONNECT privilege on the specified database (which is granted by default) or have privileges of the pg_read_all_stats role.

pg_indexes_size ( regclass ) → bigint

Computes the total disk space used by indexes attached to the specified table.

pg_relation_size ( relation regclass [ , fork text ] ) → bigint

Computes the disk space used by one " fork " of the specified relation. (Note that for most purposes it is more convenient to use the higher-level functions pg_total_relation_size or pg_table_size , which sum the sizes of all forks.) With one argument, this returns the size of the main data fork of the relation. The second argument can be provided to specify which fork to examine:

main returns the size of the main data fork of the relation.
fsm returns the size of the Free Space Map (see Section 73.3 ) associated with the relation.
vm returns the size of the Visibility Map (see Section 73.4 ) associated with the relation.
init returns the size of the initialization fork, if any, associated with the relation.

pg_size_bytes ( text ) → bigint

Converts a size in human-readable format (as returned by pg_size_pretty ) into bytes.

pg_size_pretty ( bigint ) → text

pg_size_pretty ( numeric ) → text

Converts a size in bytes into a more easily human-readable format with size units (bytes, kB, MB, GB, TB, or PB as appropriate). Note that the units are powers of 2 rather than powers of 10, so 1kB is 1024 bytes, 1MB is 1024 ² = 1048576 bytes, and so on.

pg_table_size ( regclass ) → bigint

Computes the disk space used by the specified table, excluding indexes (but including its TOAST table if any, free space map, and visibility map).

pg_tablespace_size ( name ) → bigint

pg_tablespace_size ( oid ) → bigint

Computes the total disk space used in the tablespace with the specified name or OID. To use this function, you must have CREATE privilege on the specified tablespace or have privileges of the pg_read_all_stats role, unless it is the default tablespace for the current database.

pg_total_relation_size ( regclass ) → bigint

Computes the total disk space used by the specified table, including all indexes and TOAST data. The result is equivalent to pg_table_size + pg_indexes_size .

The functions above that operate on tables or indexes accept a regclass argument, which is simply the OID of the table or index in the pg_class system catalog. You do not have to look up the OID by hand, however, since the regclass data type's input converter will do the work for you. See Section 8.19 for details.

The functions shown in Table 9.95 assist in identifying the specific disk files associated with database objects.

Table 9.95. Database Object Location Functions

Function Description
`pg_relation_filenode` ( `relation` `regclass` ) → `oid` Returns the " filenode " number currently assigned to the specified relation. The filenode is the base component of the file name(s) used for the relation (see Section 73.1 for more information). For most relations the result is the same as `pg_class` . `relfilenode` , but for certain system catalogs `relfilenode` is zero and this function must be used to get the correct value. The function returns NULL if passed a relation that does not have storage, such as a view.
`pg_relation_filepath` ( `relation` `regclass` ) → `text` Returns the entire file path name (relative to the database cluster's data directory, `PGDATA` ) of the relation.
`pg_filenode_relation` ( `tablespace` `oid` , `filenode` `oid` ) → `regclass` Returns a relation's OID given the tablespace OID and filenode it is stored under. This is essentially the inverse mapping of `pg_relation_filepath` . For a relation in the database's default tablespace, the tablespace can be specified as zero. Returns `NULL` if no relation in the current database is associated with the given values.

Function

Description

pg_relation_filenode ( relation regclass ) → oid

Returns the " filenode " number currently assigned to the specified relation. The filenode is the base component of the file name(s) used for the relation (see Section 73.1 for more information). For most relations the result is the same as pg_class . relfilenode , but for certain system catalogs relfilenode is zero and this function must be used to get the correct value. The function returns NULL if passed a relation that does not have storage, such as a view.

pg_relation_filepath ( relation regclass ) → text

Returns the entire file path name (relative to the database cluster's data directory, PGDATA ) of the relation.

pg_filenode_relation ( tablespace oid , filenode oid ) → regclass

Returns a relation's OID given the tablespace OID and filenode it is stored under. This is essentially the inverse mapping of pg_relation_filepath . For a relation in the database's default tablespace, the tablespace can be specified as zero. Returns NULL if no relation in the current database is associated with the given values.

Table 9.96 lists functions used to manage collations.

Table 9.96. Collation Management Functions

Function Description
`pg_collation_actual_version` ( `oid` ) → `text` Returns the actual version of the collation object as it is currently installed in the operating system. If this is different from the value in `pg_collation` . `collversion` , then objects depending on the collation might need to be rebuilt. See also ALTER COLLATION .
`pg_database_collation_actual_version` ( `oid` ) → `text` Returns the actual version of the database's collation as it is currently installed in the operating system. If this is different from the value in `pg_database` . `datcollversion` , then objects depending on the collation might need to be rebuilt. See also ALTER DATABASE .
`pg_import_system_collations` ( `schema` `regnamespace` ) → `integer` Adds collations to the system catalog `pg_collation` based on all the locales it finds in the operating system. This is what `initdb` uses; see Section 24.2.2 for more details. If additional locales are installed into the operating system later on, this function can be run again to add collations for the new locales. Locales that match existing entries in `pg_collation` will be skipped. (But collation objects based on locales that are no longer present in the operating system are not removed by this function.) The `schema` parameter would typically be `pg_catalog` , but that is not a requirement; the collations could be installed into some other schema as well. The function returns the number of new collation objects it created. Use of this function is restricted to superusers.

Function

Description

pg_collation_actual_version ( oid ) → text

Returns the actual version of the collation object as it is currently installed in the operating system. If this is different from the value in pg_collation . collversion , then objects depending on the collation might need to be rebuilt. See also ALTER COLLATION .

pg_database_collation_actual_version ( oid ) → text

Returns the actual version of the database's collation as it is currently installed in the operating system. If this is different from the value in pg_database . datcollversion , then objects depending on the collation might need to be rebuilt. See also ALTER DATABASE .

pg_import_system_collations ( schema regnamespace ) → integer

Adds collations to the system catalog pg_collation based on all the locales it finds in the operating system. This is what initdb uses; see Section 24.2.2 for more details. If additional locales are installed into the operating system later on, this function can be run again to add collations for the new locales. Locales that match existing entries in pg_collation will be skipped. (But collation objects based on locales that are no longer present in the operating system are not removed by this function.) The schema parameter would typically be pg_catalog , but that is not a requirement; the collations could be installed into some other schema as well. The function returns the number of new collation objects it created. Use of this function is restricted to superusers.

Table 9.97 lists functions that provide information about the structure of partitioned tables.

Table 9.97. Partitioning Information Functions

Function Description
`pg_partition_tree` ( `regclass` ) → `setof record` ( `relid` `regclass` , `parentrelid` `regclass` , `isleaf` `boolean` , `level` `integer` ) Lists the tables or indexes in the partition tree of the given partitioned table or partitioned index, with one row for each partition. Information provided includes the OID of the partition, the OID of its immediate parent, a boolean value telling if the partition is a leaf, and an integer telling its level in the hierarchy. The level value is 0 for the input table or index, 1 for its immediate child partitions, 2 for their partitions, and so on. Returns no rows if the relation does not exist or is not a partition or partitioned table.
`pg_partition_ancestors` ( `regclass` ) → `setof regclass` Lists the ancestor relations of the given partition, including the relation itself. Returns no rows if the relation does not exist or is not a partition or partitioned table.
`pg_partition_root` ( `regclass` ) → `regclass` Returns the top-most parent of the partition tree to which the given relation belongs. Returns `NULL` if the relation does not exist or is not a partition or partitioned table.

Function

Description

pg_partition_tree ( regclass ) → setof record ( relid regclass , parentrelid regclass , isleaf boolean , level integer )

Lists the tables or indexes in the partition tree of the given partitioned table or partitioned index, with one row for each partition. Information provided includes the OID of the partition, the OID of its immediate parent, a boolean value telling if the partition is a leaf, and an integer telling its level in the hierarchy. The level value is 0 for the input table or index, 1 for its immediate child partitions, 2 for their partitions, and so on. Returns no rows if the relation does not exist or is not a partition or partitioned table.

pg_partition_ancestors ( regclass ) → setof regclass

Lists the ancestor relations of the given partition, including the relation itself. Returns no rows if the relation does not exist or is not a partition or partitioned table.

pg_partition_root ( regclass ) → regclass

Returns the top-most parent of the partition tree to which the given relation belongs. Returns NULL if the relation does not exist or is not a partition or partitioned table.

For example, to check the total size of the data contained in a partitioned table measurement , one could use the following query:

SELECT pg_size_pretty(sum(pg_relation_size(relid))) AS total_size
  FROM pg_partition_tree('measurement');

9.27.8. Index Maintenance Functions

Table 9.98 shows the functions available for index maintenance tasks. (Note that these maintenance tasks are normally done automatically by autovacuum; use of these functions is only required in special cases.) These functions cannot be executed during recovery. Use of these functions is restricted to superusers and the owner of the given index.

Table 9.98. Index Maintenance Functions

Function Description
`brin_summarize_new_values` ( `index` `regclass` ) → `integer` Scans the specified BRIN index to find page ranges in the base table that are not currently summarized by the index; for any such range it creates a new summary index tuple by scanning those table pages. Returns the number of new page range summaries that were inserted into the index.
`brin_summarize_range` ( `index` `regclass` , `blockNumber` `bigint` ) → `integer` Summarizes the page range covering the given block, if not already summarized. This is like `brin_summarize_new_values` except that it only processes the page range that covers the given table block number.
`brin_desummarize_range` ( `index` `regclass` , `blockNumber` `bigint` ) → `void` Removes the BRIN index tuple that summarizes the page range covering the given table block, if there is one.
`gin_clean_pending_list` ( `index` `regclass` ) → `bigint` Cleans up the " pending " list of the specified GIN index by moving entries in it, in bulk, to the main GIN data structure. Returns the number of pages removed from the pending list. If the argument is a GIN index built with the `fastupdate` option disabled, no cleanup happens and the result is zero, because the index doesn't have a pending list. See Section 70.4.1 and Section 70.5 for details about the pending list and `fastupdate` option.

Function

Description

brin_summarize_new_values ( index regclass ) → integer

Scans the specified BRIN index to find page ranges in the base table that are not currently summarized by the index; for any such range it creates a new summary index tuple by scanning those table pages. Returns the number of new page range summaries that were inserted into the index.

brin_summarize_range ( index regclass , blockNumber bigint ) → integer

Summarizes the page range covering the given block, if not already summarized. This is like brin_summarize_new_values except that it only processes the page range that covers the given table block number.

brin_desummarize_range ( index regclass , blockNumber bigint ) → void

Removes the BRIN index tuple that summarizes the page range covering the given table block, if there is one.

gin_clean_pending_list ( index regclass ) → bigint

Cleans up the " pending " list of the specified GIN index by moving entries in it, in bulk, to the main GIN data structure. Returns the number of pages removed from the pending list. If the argument is a GIN index built with the fastupdate option disabled, no cleanup happens and the result is zero, because the index doesn't have a pending list. See Section 70.4.1 and Section 70.5 for details about the pending list and fastupdate option.

9.27.9. Generic File Access Functions

The functions shown in Table 9.99 provide native access to files on the machine hosting the server. Only files within the database cluster directory and the log_directory can be accessed, unless the user is a superuser or is granted the role pg_read_server_files . Use a relative path for files in the cluster directory, and a path matching the log_directory configuration setting for log files.

Note that granting users the EXECUTE privilege on pg_read_file() , or related functions, allows them the ability to read any file on the server that the database server process can read; these functions bypass all in-database privilege checks. This means that, for example, a user with such access is able to read the contents of the pg_authid table where authentication information is stored, as well as read any table data in the database. Therefore, granting access to these functions should be carefully considered.

Some of these functions take an optional missing_ok parameter, which specifies the behavior when the file or directory does not exist. If true , the function returns NULL or an empty result set, as appropriate. If false , an error is raised. The default is false .

Table 9.99. Generic File Access Functions

Function Description
`pg_ls_dir` ( `dirname` `text` [ , `missing_ok` `boolean` , `include_dot_dirs` `boolean` ] ) → `setof text` Returns the names of all files (and directories and other special files) in the specified directory. The `include_dot_dirs` parameter indicates whether " . " and " .. " are to be included in the result set; the default is to exclude them. Including them can be useful when `missing_ok` is `true` , to distinguish an empty directory from a non-existent directory. This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
`pg_ls_logdir` () → `setof record` ( `name` `text` , `size` `bigint` , `modification` `timestamp with time zone` ) Returns the name, size, and last modification time (mtime) of each ordinary file in the server's log directory. Filenames beginning with a dot, directories, and other special files are excluded. This function is restricted to superusers and roles with privileges of the `pg_monitor` role by default, but other users can be granted EXECUTE to run the function.
`pg_ls_waldir` () → `setof record` ( `name` `text` , `size` `bigint` , `modification` `timestamp with time zone` ) Returns the name, size, and last modification time (mtime) of each ordinary file in the server's write-ahead log (WAL) directory. Filenames beginning with a dot, directories, and other special files are excluded. This function is restricted to superusers and roles with privileges of the `pg_monitor` role by default, but other users can be granted EXECUTE to run the function.
`pg_ls_logicalmapdir` () → `setof record` ( `name` `text` , `size` `bigint` , `modification` `timestamp with time zone` ) Returns the name, size, and last modification time (mtime) of each ordinary file in the server's `pg_logical/mappings` directory. Filenames beginning with a dot, directories, and other special files are excluded. This function is restricted to superusers and members of the `pg_monitor` role by default, but other users can be granted EXECUTE to run the function.
`pg_ls_logicalsnapdir` () → `setof record` ( `name` `text` , `size` `bigint` , `modification` `timestamp with time zone` ) Returns the name, size, and last modification time (mtime) of each ordinary file in the server's `pg_logical/snapshots` directory. Filenames beginning with a dot, directories, and other special files are excluded. This function is restricted to superusers and members of the `pg_monitor` role by default, but other users can be granted EXECUTE to run the function.
`pg_ls_replslotdir` ( `slot_name` `text` ) → `setof record` ( `name` `text` , `size` `bigint` , `modification` `timestamp with time zone` ) Returns the name, size, and last modification time (mtime) of each ordinary file in the server's `pg_replslot/slot_name` directory, where `slot_name` is the name of the replication slot provided as input of the function. Filenames beginning with a dot, directories, and other special files are excluded. This function is restricted to superusers and members of the `pg_monitor` role by default, but other users can be granted EXECUTE to run the function.
`pg_ls_archive_statusdir` () → `setof record` ( `name` `text` , `size` `bigint` , `modification` `timestamp with time zone` ) Returns the name, size, and last modification time (mtime) of each ordinary file in the server's WAL archive status directory ( `pg_wal/archive_status` ). Filenames beginning with a dot, directories, and other special files are excluded. This function is restricted to superusers and members of the `pg_monitor` role by default, but other users can be granted EXECUTE to run the function.
`pg_ls_tmpdir` ( [ `tablespace` `oid` ] ) → `setof record` ( `name` `text` , `size` `bigint` , `modification` `timestamp with time zone` ) Returns the name, size, and last modification time (mtime) of each ordinary file in the temporary file directory for the specified `tablespace` . If `tablespace` is not provided, the `pg_default` tablespace is examined. Filenames beginning with a dot, directories, and other special files are excluded. This function is restricted to superusers and members of the `pg_monitor` role by default, but other users can be granted EXECUTE to run the function.
`pg_read_file` ( `filename` `text` [ , `offset` `bigint` , `length` `bigint` [ , `missing_ok` `boolean` ] ] ) → `text` Returns all or part of a text file, starting at the given byte `offset` , returning at most `length` bytes (less if the end of file is reached first). If `offset` is negative, it is relative to the end of the file. If `offset` and `length` are omitted, the entire file is returned. The bytes read from the file are interpreted as a string in the database's encoding; an error is thrown if they are not valid in that encoding. This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.
`pg_read_binary_file` ( `filename` `text` [ , `offset` `bigint` , `length` `bigint` [ , `missing_ok` `boolean` ] ] ) → `bytea` Returns all or part of a file. This function is identical to `pg_read_file` except that it can read arbitrary binary data, returning the result as `bytea` not `text` ; accordingly, no encoding checks are performed. This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function. In combination with the `convert_from` function, this function can be used to read a text file in a specified encoding and convert to the database's encoding: SELECT convert_from(pg_read_binary_file('file_in_utf8.txt'), 'UTF8');
`pg_stat_file` ( `filename` `text` [ , `missing_ok` `boolean` ] ) → `record` ( `size` `bigint` , `access` `timestamp with time zone` , `modification` `timestamp with time zone` , `change` `timestamp with time zone` , `creation` `timestamp with time zone` , `isdir` `boolean` ) Returns a record containing the file's size, last access time stamp, last modification time stamp, last file status change time stamp (Unix platforms only), file creation time stamp (Windows only), and a flag indicating if it is a directory. This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

Function

Description

pg_ls_dir ( dirname text [ , missing_ok boolean , include_dot_dirs boolean ] ) → setof text

Returns the names of all files (and directories and other special files) in the specified directory. The include_dot_dirs parameter indicates whether " . " and " .. " are to be included in the result set; the default is to exclude them. Including them can be useful when missing_ok is true , to distinguish an empty directory from a non-existent directory.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_ls_logdir () → setof record ( name text , size bigint , modification timestamp with time zone )

Returns the name, size, and last modification time (mtime) of each ordinary file in the server's log directory. Filenames beginning with a dot, directories, and other special files are excluded.

This function is restricted to superusers and roles with privileges of the pg_monitor role by default, but other users can be granted EXECUTE to run the function.

pg_ls_waldir () → setof record ( name text , size bigint , modification timestamp with time zone )

Returns the name, size, and last modification time (mtime) of each ordinary file in the server's write-ahead log (WAL) directory. Filenames beginning with a dot, directories, and other special files are excluded.

This function is restricted to superusers and roles with privileges of the pg_monitor role by default, but other users can be granted EXECUTE to run the function.

pg_ls_logicalmapdir () → setof record ( name text , size bigint , modification timestamp with time zone )

Returns the name, size, and last modification time (mtime) of each ordinary file in the server's pg_logical/mappings directory. Filenames beginning with a dot, directories, and other special files are excluded.

This function is restricted to superusers and members of the pg_monitor role by default, but other users can be granted EXECUTE to run the function.

pg_ls_logicalsnapdir () → setof record ( name text , size bigint , modification timestamp with time zone )

Returns the name, size, and last modification time (mtime) of each ordinary file in the server's pg_logical/snapshots directory. Filenames beginning with a dot, directories, and other special files are excluded.

This function is restricted to superusers and members of the pg_monitor role by default, but other users can be granted EXECUTE to run the function.

pg_ls_replslotdir ( slot_name text ) → setof record ( name text , size bigint , modification timestamp with time zone )

Returns the name, size, and last modification time (mtime) of each ordinary file in the server's pg_replslot/slot_name directory, where slot_name is the name of the replication slot provided as input of the function. Filenames beginning with a dot, directories, and other special files are excluded.

This function is restricted to superusers and members of the pg_monitor role by default, but other users can be granted EXECUTE to run the function.

pg_ls_archive_statusdir () → setof record ( name text , size bigint , modification timestamp with time zone )

Returns the name, size, and last modification time (mtime) of each ordinary file in the server's WAL archive status directory ( pg_wal/archive_status ). Filenames beginning with a dot, directories, and other special files are excluded.

This function is restricted to superusers and members of the pg_monitor role by default, but other users can be granted EXECUTE to run the function.

pg_ls_tmpdir ( [ tablespace oid ] ) → setof record ( name text , size bigint , modification timestamp with time zone )

Returns the name, size, and last modification time (mtime) of each ordinary file in the temporary file directory for the specified tablespace . If tablespace is not provided, the pg_default tablespace is examined. Filenames beginning with a dot, directories, and other special files are excluded.

This function is restricted to superusers and members of the pg_monitor role by default, but other users can be granted EXECUTE to run the function.

pg_read_file ( filename text [ , offset bigint , length bigint [ , missing_ok boolean ] ] ) → text

Returns all or part of a text file, starting at the given byte offset , returning at most length bytes (less if the end of file is reached first). If offset is negative, it is relative to the end of the file. If offset and length are omitted, the entire file is returned. The bytes read from the file are interpreted as a string in the database's encoding; an error is thrown if they are not valid in that encoding.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

pg_read_binary_file ( filename text [ , offset bigint , length bigint [ , missing_ok boolean ] ] ) → bytea

Returns all or part of a file. This function is identical to pg_read_file except that it can read arbitrary binary data, returning the result as bytea not text ; accordingly, no encoding checks are performed.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

In combination with the convert_from function, this function can be used to read a text file in a specified encoding and convert to the database's encoding:

SELECT convert_from(pg_read_binary_file('file_in_utf8.txt'), 'UTF8');

pg_stat_file ( filename text [ , missing_ok boolean ] ) → record ( size bigint , access timestamp with time zone , modification timestamp with time zone , change timestamp with time zone , creation timestamp with time zone , isdir boolean )

Returns a record containing the file's size, last access time stamp, last modification time stamp, last file status change time stamp (Unix platforms only), file creation time stamp (Windows only), and a flag indicating if it is a directory.

This function is restricted to superusers by default, but other users can be granted EXECUTE to run the function.

9.27.10. Advisory Lock Functions

The functions shown in Table 9.100 manage advisory locks. For details about proper use of these functions, see Section 13.3.5 .

All these functions are intended to be used to lock application-defined resources, which can be identified either by a single 64-bit key value or two 32-bit key values (note that these two key spaces do not overlap). If another session already holds a conflicting lock on the same resource identifier, the functions will either wait until the resource becomes available, or return a false result, as appropriate for the function. Locks can be either shared or exclusive: a shared lock does not conflict with other shared locks on the same resource, only with exclusive locks. Locks can be taken at session level (so that they are held until released or the session ends) or at transaction level (so that they are held until the current transaction ends; there is no provision for manual release). Multiple session-level lock requests stack, so that if the same resource identifier is locked three times there must then be three unlock requests to release the resource in advance of session end.

Table 9.100. Advisory Lock Functions

Function Description
`pg_advisory_lock` ( `key` `bigint` ) → `void` `pg_advisory_lock` ( `key1` `integer` , `key2` `integer` ) → `void` Obtains an exclusive session-level advisory lock, waiting if necessary.
`pg_advisory_lock_shared` ( `key` `bigint` ) → `void` `pg_advisory_lock_shared` ( `key1` `integer` , `key2` `integer` ) → `void` Obtains a shared session-level advisory lock, waiting if necessary.
`pg_advisory_unlock` ( `key` `bigint` ) → `boolean` `pg_advisory_unlock` ( `key1` `integer` , `key2` `integer` ) → `boolean` Releases a previously-acquired exclusive session-level advisory lock. Returns `true` if the lock is successfully released. If the lock was not held, `false` is returned, and in addition, an SQL warning will be reported by the server.
`pg_advisory_unlock_all` () → `void` Releases all session-level advisory locks held by the current session. (This function is implicitly invoked at session end, even if the client disconnects ungracefully.)
`pg_advisory_unlock_shared` ( `key` `bigint` ) → `boolean` `pg_advisory_unlock_shared` ( `key1` `integer` , `key2` `integer` ) → `boolean` Releases a previously-acquired shared session-level advisory lock. Returns `true` if the lock is successfully released. If the lock was not held, `false` is returned, and in addition, an SQL warning will be reported by the server.
`pg_advisory_xact_lock` ( `key` `bigint` ) → `void` `pg_advisory_xact_lock` ( `key1` `integer` , `key2` `integer` ) → `void` Obtains an exclusive transaction-level advisory lock, waiting if necessary.
`pg_advisory_xact_lock_shared` ( `key` `bigint` ) → `void` `pg_advisory_xact_lock_shared` ( `key1` `integer` , `key2` `integer` ) → `void` Obtains a shared transaction-level advisory lock, waiting if necessary.
`pg_try_advisory_lock` ( `key` `bigint` ) → `boolean` `pg_try_advisory_lock` ( `key1` `integer` , `key2` `integer` ) → `boolean` Obtains an exclusive session-level advisory lock if available. This will either obtain the lock immediately and return `true` , or return `false` without waiting if the lock cannot be acquired immediately.
`pg_try_advisory_lock_shared` ( `key` `bigint` ) → `boolean` `pg_try_advisory_lock_shared` ( `key1` `integer` , `key2` `integer` ) → `boolean` Obtains a shared session-level advisory lock if available. This will either obtain the lock immediately and return `true` , or return `false` without waiting if the lock cannot be acquired immediately.
`pg_try_advisory_xact_lock` ( `key` `bigint` ) → `boolean` `pg_try_advisory_xact_lock` ( `key1` `integer` , `key2` `integer` ) → `boolean` Obtains an exclusive transaction-level advisory lock if available. This will either obtain the lock immediately and return `true` , or return `false` without waiting if the lock cannot be acquired immediately.
`pg_try_advisory_xact_lock_shared` ( `key` `bigint` ) → `boolean` `pg_try_advisory_xact_lock_shared` ( `key1` `integer` , `key2` `integer` ) → `boolean` Obtains a shared transaction-level advisory lock if available. This will either obtain the lock immediately and return `true` , or return `false` without waiting if the lock cannot be acquired immediately.

Function

Description

pg_advisory_lock ( key bigint ) → void

pg_advisory_lock ( key1 integer , key2 integer ) → void

Obtains an exclusive session-level advisory lock, waiting if necessary.

pg_advisory_lock_shared ( key bigint ) → void

pg_advisory_lock_shared ( key1 integer , key2 integer ) → void

Obtains a shared session-level advisory lock, waiting if necessary.

pg_advisory_unlock ( key bigint ) → boolean

pg_advisory_unlock ( key1 integer , key2 integer ) → boolean

Releases a previously-acquired exclusive session-level advisory lock. Returns true if the lock is successfully released. If the lock was not held, false is returned, and in addition, an SQL warning will be reported by the server.

pg_advisory_unlock_all () → void

Releases all session-level advisory locks held by the current session. (This function is implicitly invoked at session end, even if the client disconnects ungracefully.)

pg_advisory_unlock_shared ( key bigint ) → boolean

pg_advisory_unlock_shared ( key1 integer , key2 integer ) → boolean

Releases a previously-acquired shared session-level advisory lock. Returns true if the lock is successfully released. If the lock was not held, false is returned, and in addition, an SQL warning will be reported by the server.

pg_advisory_xact_lock ( key bigint ) → void

pg_advisory_xact_lock ( key1 integer , key2 integer ) → void

Obtains an exclusive transaction-level advisory lock, waiting if necessary.

pg_advisory_xact_lock_shared ( key bigint ) → void

pg_advisory_xact_lock_shared ( key1 integer , key2 integer ) → void

Obtains a shared transaction-level advisory lock, waiting if necessary.

pg_try_advisory_lock ( key bigint ) → boolean

pg_try_advisory_lock ( key1 integer , key2 integer ) → boolean

Obtains an exclusive session-level advisory lock if available. This will either obtain the lock immediately and return true , or return false without waiting if the lock cannot be acquired immediately.

pg_try_advisory_lock_shared ( key bigint ) → boolean

pg_try_advisory_lock_shared ( key1 integer , key2 integer ) → boolean

Obtains a shared session-level advisory lock if available. This will either obtain the lock immediately and return true , or return false without waiting if the lock cannot be acquired immediately.

pg_try_advisory_xact_lock ( key bigint ) → boolean

pg_try_advisory_xact_lock ( key1 integer , key2 integer ) → boolean

Obtains an exclusive transaction-level advisory lock if available. This will either obtain the lock immediately and return true , or return false without waiting if the lock cannot be acquired immediately.

pg_try_advisory_xact_lock_shared ( key bigint ) → boolean

pg_try_advisory_xact_lock_shared ( key1 integer , key2 integer ) → boolean

Obtains a shared transaction-level advisory lock if available. This will either obtain the lock immediately and return true , or return false without waiting if the lock cannot be acquired immediately.

Prev	Up	Next
9.26. System Information Functions and Operators	Home	9.28. Trigger Functions

9.27. System Administration Functions

9.27.1. Configuration Settings Functions

9.27.2. Server Signaling Functions

9.27.3. Backup Control Functions

9.27.4. Recovery Control Functions

9.27.5. Snapshot Synchronization Functions

9.27.6. Replication Management Functions

9.27.7. Database Object Management Functions

9.27.8. Index Maintenance Functions

9.27.9. Generic File Access Functions

9.27.10. Advisory Lock Functions