Navigation :

Error Reporting and Logging

PostgreSQL 9.5.24 Documentation
Prev Up Chapter 18. Server Configuration Next

18.8.1. Where To Log

log_destination ( string )

PostgreSQL supports several methods for logging server messages, including stderr , csvlog and syslog . On Windows, eventlog is also supported. Set this parameter to a list of desired log destinations separated by commas. The default is to log to stderr only. This parameter can only be set in the postgresql.conf file or on the server command line.

If csvlog is included in log_destination , log entries are output in "comma separated value" ( CSV ) format, which is convenient for loading logs into programs. See Section 18.8.4 for details. logging_collector must be enabled to generate CSV-format log output.

Note: On most Unix systems, you will need to alter the configuration of your system's syslog daemon in order to make use of the syslog option for log_destination . PostgreSQL can log to syslog facilities LOCAL0 through LOCAL7 (see syslog_facility ), but the default syslog configuration on most platforms will discard all such messages. You will need to add something like: 

local0.*    /var/log/postgresql

to the syslog daemon's configuration file to make it work.

On Windows, when you use the eventlog option for log_destination , you should register an event source and its library with the operating system so that the Windows Event Viewer can display event log messages cleanly. See Section 17.11 for details.

logging_collector ( boolean )

This parameter enables the logging collector , which is a background process that captures log messages sent to stderr and redirects them into log files. This approach is often more useful than logging to syslog , since some types of messages might not appear in syslog output. (One common example is dynamic-linker failure messages; another is error messages produced by scripts such as archive_command .) This parameter can only be set at server start.

Note: It is possible to log to stderr without using the logging collector; the log messages will just go to wherever the server's stderr is directed. However, that method is only suitable for low log volumes, since it provides no convenient way to rotate log files. Also, on some platforms not using the logging collector can result in lost or garbled log output, because multiple processes writing concurrently to the same log file can overwrite each other's output.

Note: The logging collector is designed to never lose messages. This means that in case of extremely high load, server processes could be blocked while trying to send additional log messages when the collector has fallen behind. In contrast, syslog prefers to drop messages if it cannot write them, which means it may fail to log some messages in such cases but it will not block the rest of the system.

log_directory ( string )

When logging_collector is enabled, this parameter determines the directory in which log files will be created. It can be specified as an absolute path, or relative to the cluster data directory. This parameter can only be set in the postgresql.conf file or on the server command line. The default is pg_log .

log_filename ( string )

When logging_collector is enabled, this parameter sets the file names of the created log files. The value is treated as a strftime pattern, so % -escapes can be used to specify time-varying file names. (Note that if there are any time-zone-dependent % -escapes, the computation is done in the zone specified by log_timezone .) The supported % -escapes are similar to those listed in the Open Group's strftime specification. Note that the system's strftime is not used directly, so platform-specific (nonstandard) extensions do not work. The default is postgresql-%Y-%m-%d_%H%M%S.log .

If you specify a file name without escapes, you should plan to use a log rotation utility to avoid eventually filling the entire disk. In releases prior to 8.4, if no % escapes were present, PostgreSQL would append the epoch of the new log file's creation time, but this is no longer the case.

If CSV-format output is enabled in log_destination , .csv will be appended to the timestamped log file name to create the file name for CSV-format output. (If log_filename ends in .log , the suffix is replaced instead.)

This parameter can only be set in the postgresql.conf file or on the server command line.

log_file_mode ( integer )

On Unix systems this parameter sets the permissions for log files when logging_collector is enabled. (On Microsoft Windows this parameter is ignored.) The parameter value is expected to be a numeric mode specified in the format accepted by the chmod and umask system calls. (To use the customary octal format the number must start with a 0 (zero).)

The default permissions are 0600 , meaning only the server owner can read or write the log files. The other commonly useful setting is 0640 , allowing members of the owner's group to read the files. Note however that to make use of such a setting, you'll need to alter log_directory to store the files somewhere outside the cluster data directory. In any case, it's unwise to make the log files world-readable, since they might contain sensitive data.

This parameter can only be set in the postgresql.conf file or on the server command line.

log_rotation_age ( integer )

When logging_collector is enabled, this parameter determines the maximum lifetime of an individual log file. After this many minutes have elapsed, a new log file will be created. Set to zero to disable time-based creation of new log files. This parameter can only be set in the postgresql.conf file or on the server command line.

log_rotation_size ( integer )

When logging_collector is enabled, this parameter determines the maximum size of an individual log file. After this many kilobytes have been emitted into a log file, a new log file will be created. Set to zero to disable size-based creation of new log files. This parameter can only be set in the postgresql.conf file or on the server command line.

log_truncate_on_rotation ( boolean )

When logging_collector is enabled, this parameter will cause PostgreSQL to truncate (overwrite), rather than append to, any existing log file of the same name. However, truncation will occur only when a new file is being opened due to time-based rotation, not during server startup or size-based rotation. When off, pre-existing files will be appended to in all cases. For example, using this setting in combination with a log_filename like postgresql-%H.log would result in generating twenty-four hourly log files and then cyclically overwriting them. This parameter can only be set in the postgresql.conf file or on the server command line.

Example: To keep 7 days of logs, one log file per day named server_log.Mon , server_log.Tue , etc, and automatically overwrite last week's log with this week's log, set log_filename to server_log.%a , log_truncate_on_rotation to on , and log_rotation_age to 1440 .

Example: To keep 24 hours of logs, one log file per hour, but also rotate sooner if the log file size exceeds 1GB, set log_filename to server_log.%H%M , log_truncate_on_rotation to on , log_rotation_age to 60 , and log_rotation_size to 1000000 . Including %M in log_filename allows any size-driven rotations that might occur to select a file name different from the hour's initial file name.

syslog_facility ( enum )

When logging to syslog is enabled, this parameter determines the syslog "facility" to be used. You can choose from LOCAL0 , LOCAL1 , LOCAL2 , LOCAL3 , LOCAL4 , LOCAL5 , LOCAL6 , LOCAL7 ; the default is LOCAL0 . See also the documentation of your system's syslog daemon. This parameter can only be set in the postgresql.conf file or on the server command line.

syslog_ident ( string )

When logging to syslog is enabled, this parameter determines the program name used to identify PostgreSQL messages in syslog logs. The default is postgres . This parameter can only be set in the postgresql.conf file or on the server command line.

event_source ( string )

When logging to event log is enabled, this parameter determines the program name used to identify PostgreSQL messages in the log. The default is PostgreSQL . This parameter can only be set in the postgresql.conf file or on the server command line.

18.8.2. When To Log

log_min_messages ( enum )

Controls which message levels are written to the server log. Valid values are DEBUG5 , DEBUG4 , DEBUG3 , DEBUG2 , DEBUG1 , INFO , NOTICE , WARNING , ERROR , LOG , FATAL , and PANIC . Each level includes all the levels that follow it. The later the level, the fewer messages are sent to the log. The default is WARNING . Note that LOG has a different rank here than in client_min_messages . Only superusers can change this setting.

log_min_error_statement ( enum )

Controls which SQL statements that cause an error condition are recorded in the server log. The current SQL statement is included in the log entry for any message of the specified severity or higher. Valid values are DEBUG5 , DEBUG4 , DEBUG3 , DEBUG2 , DEBUG1 , INFO , NOTICE , WARNING , ERROR , LOG , FATAL , and PANIC . The default is ERROR , which means statements causing errors, log messages, fatal errors, or panics will be logged. To effectively turn off logging of failing statements, set this parameter to PANIC . Only superusers can change this setting.

log_min_duration_statement ( integer )

Causes the duration of each completed statement to be logged if the statement ran for at least the specified number of milliseconds. Setting this to zero prints all statement durations. Minus-one (the default) disables logging statement durations. For example, if you set it to 250ms then all SQL statements that run 250ms or longer will be logged. Enabling this parameter can be helpful in tracking down unoptimized queries in your applications. Only superusers can change this setting.

For clients using extended query protocol, durations of the Parse, Bind, and Execute steps are logged independently.

Note: When using this option together with log_statement , the text of statements that are logged because of log_statement will not be repeated in the duration log message. If you are not using syslog , it is recommended that you log the PID or session ID using log_line_prefix so that you can link the statement message to the later duration message using the process ID or session ID.

Table 18-1 explains the message severity levels used by PostgreSQL . If logging output is sent to syslog or Windows' eventlog , the severity levels are translated as shown in the table.

Table 18-1. Message Severity Levels

Severity Usage syslog eventlog
DEBUG1..DEBUG5 Provides successively-more-detailed information for use by developers. DEBUG INFORMATION
INFO Provides information implicitly requested by the user, e.g., output from VACUUM VERBOSE . INFO INFORMATION
NOTICE Provides information that might be helpful to users, e.g., notice of truncation of long identifiers. NOTICE INFORMATION
WARNING Provides warnings of likely problems, e.g., COMMIT outside a transaction block. NOTICE WARNING
ERROR Reports an error that caused the current command to abort. WARNING ERROR
LOG Reports information of interest to administrators, e.g., checkpoint activity. INFO INFORMATION
FATAL Reports an error that caused the current session to abort. ERR ERROR
PANIC Reports an error that caused all database sessions to abort. CRIT ERROR

18.8.3. What To Log

application_name ( string )

The application_name can be any string of less than NAMEDATALEN characters (64 characters in a standard build). It is typically set by an application upon connection to the server. The name will be displayed in the pg_stat_activity view and included in CSV log entries. It can also be included in regular log entries via the log_line_prefix parameter. Only printable ASCII characters may be used in the application_name value. Other characters will be replaced with question marks ( ? ).

debug_print_parse ( boolean )
debug_print_rewritten ( boolean )
debug_print_plan ( boolean )

These parameters enable various debugging output to be emitted. When set, they print the resulting parse tree, the query rewriter output, or the execution plan for each executed query. These messages are emitted at LOG message level, so by default they will appear in the server log but will not be sent to the client. You can change that by adjusting client_min_messages and/or log_min_messages . These parameters are off by default.

debug_pretty_print ( boolean )

When set, debug_pretty_print indents the messages produced by debug_print_parse , debug_print_rewritten , or debug_print_plan . This results in more readable but much longer output than the "compact" format used when it is off. It is on by default.

log_checkpoints ( boolean )

Causes checkpoints and restartpoints to be logged in the server log. Some statistics are included in the log messages, including the number of buffers written and the time spent writing them. This parameter can only be set in the postgresql.conf file or on the server command line. The default is off.

log_connections ( boolean )

Causes each attempted connection to the server to be logged, as well as successful completion of client authentication. Only superusers can change this parameter at session start, and it cannot be changed at all within a session. The default is off .

Note: Some client programs, like psql , attempt to connect twice while determining if a password is required, so duplicate "connection received" messages do not necessarily indicate a problem.

log_disconnections ( boolean )

Causes session terminations to be logged. The log output provides information similar to log_connections , plus the duration of the session. Only superusers can change this parameter at session start, and it cannot be changed at all within a session. The default is off .

log_duration ( boolean )

Causes the duration of every completed statement to be logged. The default is off . Only superusers can change this setting.

For clients using extended query protocol, durations of the Parse, Bind, and Execute steps are logged independently.

Note: The difference between setting this option and setting log_min_duration_statement to zero is that exceeding log_min_duration_statement forces the text of the query to be logged, but this option doesn't. Thus, if log_duration is on and log_min_duration_statement has a positive value, all durations are logged but the query text is included only for statements exceeding the threshold. This behavior can be useful for gathering statistics in high-load installations.

log_error_verbosity ( enum )

Controls the amount of detail written in the server log for each message that is logged. Valid values are TERSE , DEFAULT , and VERBOSE , each adding more fields to displayed messages. TERSE excludes the logging of DETAIL , HINT , QUERY , and CONTEXT error information. VERBOSE output includes the SQLSTATE error code (see also Appendix A ) and the source code file name, function name, and line number that generated the error. Only superusers can change this setting.

log_hostname ( boolean )

By default, connection log messages only show the IP address of the connecting host. Turning this parameter on causes logging of the host name as well. Note that depending on your host name resolution setup this might impose a non-negligible performance penalty. This parameter can only be set in the postgresql.conf file or on the server command line.

log_line_prefix ( string )

This is a printf -style string that is output at the beginning of each log line. % characters begin "escape sequences" that are replaced with status information as outlined below. Unrecognized escapes are ignored. Other characters are copied straight to the log line. Some escapes are only recognized by session processes, and will be treated as empty by background processes such as the main server process. Status information may be aligned either left or right by specifying a numeric literal after the % and before the option. A negative value will cause the status information to be padded on the right with spaces to give it a minimum width, whereas a positive value will pad on the left. Padding can be useful to aid human readability in log files. This parameter can only be set in the postgresql.conf file or on the server command line. The default is an empty string.

Escape Effect Session only
%a Application name yes
%u User name yes
%d Database name yes
%r Remote host name or IP address, and remote port yes
%h Remote host name or IP address yes
%p Process ID no
%t Time stamp without milliseconds no
%m Time stamp with milliseconds no
%i Command tag: type of session's current command yes
%e SQLSTATE error code no
%c Session ID: see below no
%l Number of the log line for each session or process, starting at 1 no
%s Process start time stamp no
%v Virtual transaction ID (backendID/localXID) no
%x Transaction ID (0 if none is assigned) no
%q Produces no output, but tells non-session processes to stop at this point in the string; ignored by session processes no
%% Literal % no

The %c escape prints a quasi-unique session identifier, consisting of two 4-byte hexadecimal numbers (without leading zeros) separated by a dot. The numbers are the process start time and the process ID, so %c can also be used as a space saving way of printing those items. For example, to generate the session identifier from pg_stat_activity , use this query: 

SELECT to_hex(trunc(EXTRACT(EPOCH FROM backend_start))::integer) || '.' ||
       to_hex(pid)
FROM pg_stat_activity;

Tip: If you set a nonempty value for log_line_prefix , you should usually make its last character be a space, to provide visual separation from the rest of the log line. A punctuation character can be used too.

Tip: Syslog produces its own time stamp and process ID information, so you probably do not want to include those escapes if you are logging to syslog .

log_lock_waits ( boolean )

Controls whether a log message is produced when a session waits longer than deadlock_timeout to acquire a lock. This is useful in determining if lock waits are causing poor performance. The default is off . Only superusers can change this setting.

log_statement ( enum )

Controls which SQL statements are logged. Valid values are none (off), ddl , mod , and all (all statements). ddl logs all data definition statements, such as CREATE , ALTER , and DROP statements. mod logs all ddl statements, plus data-modifying statements such as INSERT , UPDATE , DELETE , TRUNCATE , and COPY FROM . PREPARE , EXECUTE , and EXPLAIN ANALYZE statements are also logged if their contained command is of an appropriate type. For clients using extended query protocol, logging occurs when an Execute message is received, and values of the Bind parameters are included (with any embedded single-quote marks doubled).

The default is none . Only superusers can change this setting.

Note: Statements that contain simple syntax errors are not logged even by the log_statement = all setting, because the log message is emitted only after basic parsing has been done to determine the statement type. In the case of extended query protocol, this setting likewise does not log statements that fail before the Execute phase (i.e., during parse analysis or planning). Set log_min_error_statement to ERROR (or lower) to log such statements.

log_replication_commands ( boolean )

Causes each replication command to be logged in the server log. See Section 50.3 for more information about replication command. The default value is off . Only superusers can change this setting.

log_temp_files ( integer )

Controls logging of temporary file names and sizes. Temporary files can be created for sorts, hashes, and temporary query results. A log entry is made for each temporary file when it is deleted. A value of zero logs all temporary file information, while positive values log only files whose size is greater than or equal to the specified number of kilobytes. The default setting is -1, which disables such logging. Only superusers can change this setting.

log_timezone ( string )

Sets the time zone used for timestamps written in the server log. Unlike TimeZone , this value is cluster-wide, so that all sessions will report timestamps consistently. The built-in default is GMT , but that is typically overridden in postgresql.conf ; initdb will install a setting there corresponding to its system environment. See Section 8.5.3 for more information. This parameter can only be set in the postgresql.conf file or on the server command line.

18.8.4. Using CSV-Format Log Output

Including csvlog in the log_destination list provides a convenient way to import log files into a database table. This option emits log lines in comma-separated-values ( CSV ) format, with these columns: time stamp with milliseconds, user name, database name, process ID, client host:port number, session ID, per-session line number, command tag, session start time, virtual transaction ID, regular transaction ID, error severity, SQLSTATE code, error message, error message detail, hint, internal query that led to the error (if any), character count of the error position therein, error context, user query that led to the error (if any and enabled by log_min_error_statement ), character count of the error position therein, location of the error in the PostgreSQL source code (if log_error_verbosity is set to verbose ), and application name. Here is a sample table definition for storing CSV-format log output: 

CREATE TABLE postgres_log
(
  log_time timestamp(3) with time zone,
  user_name text,
  database_name text,
  process_id integer,
  connection_from text,
  session_id text,
  session_line_num bigint,
  command_tag text,
  session_start_time timestamp with time zone,
  virtual_transaction_id text,
  transaction_id bigint,
  error_severity text,
  sql_state_code text,
  message text,
  detail text,
  hint text,
  internal_query text,
  internal_query_pos integer,
  context text,
  query text,
  query_pos integer,
  location text,
  application_name text,
  PRIMARY KEY (session_id, session_line_num)
);

To import a log file into this table, use the COPY FROM command: 

COPY postgres_log FROM '/full/path/to/logfile.csv' WITH csv;

It is also possible to access the file as a foreign table, using the supplied file_fdw module.

There are a few things you need to do to simplify importing CSV log files:

  1. Set log_filename and log_rotation_age to provide a consistent, predictable naming scheme for your log files. This lets you predict what the file name will be and know when an individual log file is complete and therefore ready to be imported.

  2. Set log_rotation_size to 0 to disable size-based log rotation, as it makes the log file name difficult to predict.

  3. Set log_truncate_on_rotation to on so that old log data isn't mixed with the new in the same file.

  4. The table definition above includes a primary key specification. This is useful to protect against accidentally importing the same information twice. The COPY command commits all of the data it imports at one time, so any error will cause the entire import to fail. If you import a partial log file and later import the file again when it is complete, the primary key violation will cause the import to fail. Wait until the log is complete and closed before importing. This procedure will also protect against accidentally importing a partial line that hasn't been completely written, which would also cause COPY to fail.

18.8.5. Process Title

These settings control how the process title as seen by ps is modified. See Section 27.1 for details.

cluster_name ( string )

Sets the cluster name that appears in the process title for all processes in this cluster. The name can be any string of less than NAMEDATALEN characters (64 characters in a standard build). Only printable ASCII characters may be used in the cluster_name value. Other characters will be replaced with question marks ( ? ). No name is shown if this parameter is set to the empty string '' (which is the default). This parameter can only be set at server start.

The process title is typically viewed using programs like ps or, on Windows, Process Explorer .

update_process_title ( boolean )

Enables updating of the process title every time a new SQL command is received by the server. The process title is typically viewed by the ps command, or in Windows by using the Process Explorer . Only superusers can change this setting.

Prev Home Next
Query Planning Up Run-time Statistics